The 4th Executive Directors' Meeting of the Superhard Materials Branch was held in Chengdu from April 27 to 30, 2010. The main topics of the meeting were: 1. Communicate the spirit of the first meeting of the General Secretary in 2010, and announce the total of 2010. The results of the selection of the six top ten enterprises (limited to the list of winners of the club); 2. Review of the work summary of the club in 2009; 3. Review the 2010 work plan of the club and the main work arrangements in the near future; 4. Discuss and adjust the list through the leadership of the club 5. Discuss and pass the list of candidates for the 4th expert and various professional committees; 5. Report the economic performance of the industry in 2009; 6. Discuss and review the “12th Five-Year†development plan of the industry; 7. Invited users and the industry Expert lectures. The directors who attended the meeting and the representatives of the above units and members of the association's expert group and industry enterprises counted 90 representatives. There are 25 executive directors and above units, which meet the requirements of more than 2/3 of the representatives of the association. All resolutions formed at the meeting are legal and valid. 
Conference venue 1
Conference venue 2
On the evening of April 27, the chairman of the conference held a meeting of the chairman of the board of directors, pre-discussed the adjustment of the governing units, the election of experts and professional committees, and formed a shortlist for the standing council to vote.
On the morning of April 28th, the Executive Directors' Meeting was held. The chairman of the board of directors and the director of the Zhengzhou Abrasives Grinding Research Institute, Zhu Feng, presided over the meeting. The secretary of the branch, Li Zhihong, conveyed the spirit of the first meeting of the General Assembly in 2010 to the conference. The meeting of the Secretary-General was held, and the good news of the 2009 Advanced Branch was reported. This club has been rated as an advanced club by the General Association for several years, indicating that the work of the super-hard club is practical and effective. This is the first time that the club has been rated as an advanced club since its formation. Secretary-General Li also reported the results of the six top ten enterprises in the General Conference. Zhengzhou Abrasives Grinding Research Institute and Henan Huanghe Industrial Group Co., Ltd. were awarded the top ten enterprises for independent innovation; Henan Zhongnan Industrial Co., Ltd. passed the review and passed the original The title of “Top Ten Independent Enterprises†continues to be effective. Guangdong Benlang Superhard New Material Co., Ltd. was awarded the top ten enterprises of the brand; Zhengzhou Huajing Diamond Co., Ltd., Henan Zhongnan Industry Co., Ltd., Henan Huanghe Industrial Group Co., Ltd. and Boshen Tools Co., Ltd. Qualified, the top ten companies that have created the brand activities continue to be effective. Since the general election of the top ten companies, each time the club has a list of companies, this is very hard-won. This kind of selection is carried out in more than 1,400 enterprises in the industry under the jurisdiction of 25 chapters and professional committees. This fully demonstrates that the industry's award-winning enterprises have strong brand awareness, good product quality, and many foreign exchange earnings. Support the industry to work well. It is hoped that more companies will actively participate in the industry appraisal activities in the future, and improve their level of participation and enhance their competitiveness. Because the total number of clubs is very limited, the outstanding companies that have not been evaluated by the general meeting will be commended within the scope of the club.
Secretary-General Li Zhihong made a summary of the work in 2009 and other reports. Secretary-General Li Zhihong gave a report to the General Assembly on the work summary of the 2009 work. It is mainly divided into four aspects: 1. Work closely around the main points of the work of the General Conference and complete the tasks assigned by the General Conference. Tasks; timely convey the spirit of the General Conference, implement the guidelines of the General Conference, actively carry out policy research, be a good government aide, seek a good industry development policy environment; actively and carefully prepare, carefully organize, successfully complete the re-election tasks, and elect new A leading organization; actively participated in CIMT2009 and preparations for CCMT2010 exhibition, carried out exhibits review activities; actively organized enterprises to participate in the "six top ten enterprises" declaration, encourage the industry to produce more boutiques, famous brands; strengthen learning and exercise, improve service capabilities. Keep up with the development of the situation and adjust the membership structure in a timely manner. 2. Conduct colorful club activities according to the characteristics of the industry. Prepare to hold industry technology development forums, carry out a variety of supporting activities; actively carry out investigations on the impact of the financial crisis on the industry, guide enterprises to make self-help; continue to actively carry out international activities, vigorously promote the technology and products of the industry, and enhance international influence and Right to speak; participate in the 12th International Advanced Abrasive Technology Conference and other international activities. Conducted industry professional skills appraisal work. 3. Strengthen statistical work, and do a good job in the industry yearbook, "Diamond and Abrasives Engineering" magazine, "China Superhard Materials", "Abrasive Abrasives News", various publications and industry technology and technology development forum proceedings, 2009 edition editor Published in a volume of magazines, 24 books, about 3.45 million words. Provide a large number of information services for the industry. 4. Strengthen the construction of branch Internet sites and improve the level of information services. 
Chairman Zhu Feng gave a report on the 2010 work plan to the conference. It is divided into 8 aspects: 1. Focus on policy adjustment, strengthen policy research, try to capture business opportunities, and guide the healthy development of the industry. 2. Implement the work guidelines of the General Conference and actively carry out work around the main points of the work of the General Conference. 3. Strengthen club activities to further enhance the influence, appeal, cohesion and combat effectiveness of the club. 4. Improve the technology and management innovation capability and core competitiveness construction, pay close attention to product structure adjustment, and change the economic growth mode. 5. Research the market, do a good job in exhibitions, and strengthen the brand. 6. Strengthen foreign exchanges and cooperation and encourage more members to participate in international competition. 7. Continue to strengthen the construction of public opinion positions and do a good job in propaganda. 8. Strengthen information statistics and do a good job in yearbook, information and consulting services.
Participants seriously discussed and approved the work summary and plan.
The delegates voted by hand and passed the leadership 
Delegates voted by hand to pass the list of experts and professional committees. Secretary-General Li Zhihong introduced a list of candidates for the adjustment of the leadership of the club. As the vice president unit Shanghai Xinshang Abrasives Co., Ltd. transferred its super-hard materials part and applied for the withdrawal of the super-hard materials branch, the chairman meeting proposed the list of the governing body adjustment according to the situation: the former standing director unit Henan Provincial Yalong Superhard Materials Co., Ltd. was promoted to the vice chairman unit; the principle unit Fujian Wanlong Diamond Tools Co., Ltd. was promoted to the standing director unit; the original member unit Guangdong Xinjingang Superhard Materials Co., Ltd. and Henan Borui Technology Development were added. The company is a governing unit. The resolution was adopted by the General Assembly by a show of hands.
Secretary-General Li Zhihong also introduced the recommendations of the club experts and professional committees. Firstly, the industry professionals with senior professional titles voluntarily signed up and recommended by the company. After the summary, the secretariat conducted preliminary screening according to the application conditions, and then submitted it to the honorary director of the last expert committee, Academician Zou Guangtian, and the director, Professor Shen Dongtong, conducted a review and based on it. The opinions were supplemented and then submitted to the previous deputy director for pre-trial. Finally, the meeting of the chairman of the meeting confirmed the list of candidates and submitted the voting at this meeting. Due to the preparations before the meeting, the opinions of all parties were widely heard. The meeting was successfully voted in full and the list was approved. The re-election of the four experts and professional committees was completed (list attached). So far, the four branches of the club have been fully established.
Secretary-General Li Zhihong's report on the economic operation of the industry After the expansion of the executive directors, after a short break, Secretary-General Li Zhihong made a report on the economic performance of the industry in 2009. He analyzed the overall development of the superhard industry in 2009 through 15 forms. Including the industry's main economic indicators, superhard materials and product output value, China Customs diamond and grinding wheel products import and export data, the United States, Japan and other imported synthetic diamond data, Hong Kong Customs diamond and grinding wheel products import and export data. In 2009, due to the impact of the economic crisis, the economic indicators of the industry generally declined significantly. The decline in sales revenue and output value was around 10%, and the total profit fell more than 35%. The number of employees has declined, although wages have risen slightly, but the price factor should be basically the same as in 2009. The output of synthetic diamond was estimated to be 5.69 billion carats, an increase of 9.5% over the previous year, and cubic boron nitride production fell by 11.8% to 246 million carats. The output of several types of products has increased, but prices have declined to varying degrees. According to China's customs data, synthetic diamond exports fell by 21%, while grinding wheel products declined by only 2%. From the statistics of China, Japan, and Hong Kong Customs, the decline in the import and export of synthetic diamonds is more obvious, basically in double digits. However, the proportion of diamonds in China still rises slightly. 
Secretary-General Li Zhihong and experts and representatives discussed the 12th Five-Year Development Plan On the afternoon of the 28th, Secretary-General Li Zhihong presided over the first draft of the 12th Five-Year Development Plan for the superhard materials industry drafted by the Secretariat. At the end of 2009, according to the requirements of the Industry Coordination Department of the National Development and Reform Commission and the Equipment Industry Department of the Ministry of Industry and Information Technology, the headquarters of the Association began to prepare for the development of the “12th Five-Year†China Machine Tool Industry Development Plan, and required the clubs to formulate the “Twelfth Five-Year†development of small industries. planning. In order to do a good job in this work, the status quo and future development of the super-hard materials industry will be submitted to relevant state departments on time, and the state will support the industry and introduce a good development policy to guide the healthy development of the industry. The members of the 3rd Technical Expert Committee of the Chapter and the member units wrote the “12th Five-Year Plan†proposals for their respective product fields. After the summary by the Secretariat, the draft was drafted and a heated discussion was held at the conference. Experts and representatives attended the meeting. Actively issued important guiding suggestions. The Secretariat will carefully sort out relevant opinions and revise the draft plan, which will be officially reported to the General Conference at the end of May. 
Professor Wang Qinsheng, Executive Deputy Director of the Technical Experts Committee, presided over the special report meeting
Secretary-General Li Zhihong's report to replace Ding Haishan of Luo axis 
Niu Liangang, deputy chief engineer of Xi'an Aviation Power Control Co., Ltd. made a report
German expert Trenker is making a report 
Mr. Chen Honglie from Hong Kong Yingmao Company gave a live translation of Mr. Trenker
General Manager Xie Zhigang of Guilin Tebang New Materials Co., Ltd.
Professor Zhai Zili from the Institute of Atomic and Molecular Physics of Sichuan University 
Manager Wang Haizhi replaced the general manager of China Southern Airlines Tenglong Ma Ruofei to report on April 29th, and held a special lecture by invited experts. The first is a user industry expert. Ding Haishan, an expert from Luoyang Bearing Research Institute, wrote the article “Application of Superhard Material Tools in Bearing Processingâ€. Since he was unable to attend the meeting, Secretary-General Li Zhihong presided over the speech. Then came the report of “Superhard Material Tools for Aircraft Parts Processing†by Niu Liangang, deputy chief engineer of Xi'an Aerodynamics Control Co., Ltd. Both reports provide detailed information on the application of superhard materials tools in related industries, and provide participants with a more detailed understanding of the application of superhard tools in these areas. This is followed by a report by Mr. Trenker Alfred of Trenker, Germany, “Application and Manufacturing of Superhard Material Plating Tools in the Semiconductor and Optical Industryâ€, translated by Mr. Chen Honglie from Hong Kong Yingmao Company. Trenker gave a detailed introduction with a lot of pictures. Then, Xie Zhigang, general manager of Guilin Tebang New Materials Co., Ltd. and Prof. Zhai Zili, from the Institute of Atomic and Molecular Physics of Sichuan University, respectively, made "the application status and future development of diamond wire saws" and "the future development trend of PDC and PCBN superhard tools". The report benefited the participants. Finally, a new report was added. The manager of Suzhou Daocheng Trading Co., Ltd., Wang Haizhi, presided over the latest report by Ma Ruofei, general manager of Suzhou Nanhang Tenglong Technology Co., Ltd., “one of the most effective ways to stabilize the quality of diamond productsâ€. In this paper, the experimental data proves that the author's new restoration ideas and methods have greatly improved the quality of diamond products, and the test life has increased by 55.3%, and the performance is stable, which has given participants some inspiration.
The conference closed successfully after completing the scheduled agenda.
Conference venue 1 Conference venue 2 On the evening of April 27, the chairman of the conference held a meeting of the chairman of the board of directors, pre-discussed the adjustment of the governing units, the election of experts and professional committees, and formed a shortlist for the standing council to vote. On the morning of April 28th, the Executive Directors' Meeting was held. The chairman of the board of directors and the director of the Zhengzhou Abrasives Grinding Research Institute, Zhu Feng, presided over the meeting. The secretary of the branch, Li Zhihong, conveyed the spirit of the first meeting of the General Assembly in 2010 to the conference. The meeting of the Secretary-General was held, and the good news of the 2009 Advanced Branch was reported. This club has been rated as an advanced club by the General Association for several years, indicating that the work of the super-hard club is practical and effective. This is the first time that the club has been rated as an advanced club since its formation. Secretary-General Li also reported the results of the six top ten enterprises in the General Conference. Zhengzhou Abrasives Grinding Research Institute and Henan Huanghe Industrial Group Co., Ltd. were awarded the top ten enterprises for independent innovation; Henan Zhongnan Industrial Co., Ltd. passed the review and passed the original The title of “Top Ten Independent Enterprises†continues to be effective. Guangdong Benlang Superhard New Material Co., Ltd. was awarded the top ten enterprises of the brand; Zhengzhou Huajing Diamond Co., Ltd., Henan Zhongnan Industry Co., Ltd., Henan Huanghe Industrial Group Co., Ltd. and Boshen Tools Co., Ltd. Qualified, the top ten companies that have created the brand activities continue to be effective. Since the general election of the top ten companies, each time the club has a list of companies, this is very hard-won. This kind of selection is carried out in more than 1,400 enterprises in the industry under the jurisdiction of 25 chapters and professional committees. This fully demonstrates that the industry's award-winning enterprises have strong brand awareness, good product quality, and many foreign exchange earnings. Support the industry to work well. It is hoped that more companies will actively participate in the industry appraisal activities in the future, and improve their level of participation and enhance their competitiveness. Because the total number of clubs is very limited, the outstanding companies that have not been evaluated by the general meeting will be commended within the scope of the club.
Secretary-General Li Zhihong made a summary of the work in 2009 and other reports. Secretary-General Li Zhihong gave a report to the General Assembly on the work summary of the 2009 work. It is mainly divided into four aspects: 1. Work closely around the main points of the work of the General Conference and complete the tasks assigned by the General Conference. Tasks; timely convey the spirit of the General Conference, implement the guidelines of the General Conference, actively carry out policy research, be a good government aide, seek a good industry development policy environment; actively and carefully prepare, carefully organize, successfully complete the re-election tasks, and elect new A leading organization; actively participated in CIMT2009 and preparations for CCMT2010 exhibition, carried out exhibits review activities; actively organized enterprises to participate in the "six top ten enterprises" declaration, encourage the industry to produce more boutiques, famous brands; strengthen learning and exercise, improve service capabilities. Keep up with the development of the situation and adjust the membership structure in a timely manner. 2. Conduct colorful club activities according to the characteristics of the industry. Prepare to hold industry technology development forums, carry out a variety of supporting activities; actively carry out investigations on the impact of the financial crisis on the industry, guide enterprises to make self-help; continue to actively carry out international activities, vigorously promote the technology and products of the industry, and enhance international influence and Right to speak; participate in the 12th International Advanced Abrasive Technology Conference and other international activities. Conducted industry professional skills appraisal work. 3. Strengthen statistical work, and do a good job in the industry yearbook, "Diamond and Abrasives Engineering" magazine, "China Superhard Materials", "Abrasive Abrasives News", various publications and industry technology and technology development forum proceedings, 2009 edition editor Published in a volume of magazines, 24 books, about 3.45 million words. Provide a large number of information services for the industry. 4. Strengthen the construction of branch Internet sites and improve the level of information services. Chairman Zhu Feng gave a report on the 2010 work plan to the conference. It is divided into 8 aspects: 1. Focus on policy adjustment, strengthen policy research, try to capture business opportunities, and guide the healthy development of the industry. 2. Implement the work guidelines of the General Conference and actively carry out work around the main points of the work of the General Conference. 3. Strengthen club activities to further enhance the influence, appeal, cohesion and combat effectiveness of the club. 4. Improve the technology and management innovation capability and core competitiveness construction, pay close attention to product structure adjustment, and change the economic growth mode. 5. Research the market, do a good job in exhibitions, and strengthen the brand. 6. Strengthen foreign exchanges and cooperation and encourage more members to participate in international competition. 7. Continue to strengthen the construction of public opinion positions and do a good job in propaganda. 8. Strengthen information statistics and do a good job in yearbook, information and consulting services. Participants seriously discussed and approved the work summary and plan.
The delegates voted by hand and passed the leadership Delegates voted by hand to pass the list of experts and professional committees. Secretary-General Li Zhihong introduced a list of candidates for the adjustment of the leadership of the club. As the vice president unit Shanghai Xinshang Abrasives Co., Ltd. transferred its super-hard materials part and applied for the withdrawal of the super-hard materials branch, the chairman meeting proposed the list of the governing body adjustment according to the situation: the former standing director unit Henan Provincial Yalong Superhard Materials Co., Ltd. was promoted to the vice chairman unit; the principle unit Fujian Wanlong Diamond Tools Co., Ltd. was promoted to the standing director unit; the original member unit Guangdong Xinjingang Superhard Materials Co., Ltd. and Henan Borui Technology Development were added. The company is a governing unit. The resolution was adopted by the General Assembly by a show of hands. Secretary-General Li Zhihong also introduced the recommendations of the club experts and professional committees. Firstly, the industry professionals with senior professional titles voluntarily signed up and recommended by the company. After the summary, the secretariat conducted preliminary screening according to the application conditions, and then submitted it to the honorary director of the last expert committee, Academician Zou Guangtian, and the director, Professor Shen Dongtong, conducted a review and based on it. The opinions were supplemented and then submitted to the previous deputy director for pre-trial. Finally, the meeting of the chairman of the meeting confirmed the list of candidates and submitted the voting at this meeting. Due to the preparations before the meeting, the opinions of all parties were widely heard. The meeting was successfully voted in full and the list was approved. The re-election of the four experts and professional committees was completed (list attached). So far, the four branches of the club have been fully established.
Secretary-General Li Zhihong's report on the economic operation of the industry After the expansion of the executive directors, after a short break, Secretary-General Li Zhihong made a report on the economic performance of the industry in 2009. He analyzed the overall development of the superhard industry in 2009 through 15 forms. Including the industry's main economic indicators, superhard materials and product output value, China Customs diamond and grinding wheel products import and export data, the United States, Japan and other imported synthetic diamond data, Hong Kong Customs diamond and grinding wheel products import and export data. In 2009, due to the impact of the economic crisis, the economic indicators of the industry generally declined significantly. The decline in sales revenue and output value was around 10%, and the total profit fell more than 35%. The number of employees has declined, although wages have risen slightly, but the price factor should be basically the same as in 2009. The output of synthetic diamond was estimated to be 5.69 billion carats, an increase of 9.5% over the previous year, and cubic boron nitride production fell by 11.8% to 246 million carats. The output of several types of products has increased, but prices have declined to varying degrees. According to China's customs data, synthetic diamond exports fell by 21%, while grinding wheel products declined by only 2%. From the statistics of China, Japan, and Hong Kong Customs, the decline in the import and export of synthetic diamonds is more obvious, basically in double digits. However, the proportion of diamonds in China still rises slightly. Secretary-General Li Zhihong and experts and representatives discussed the 12th Five-Year Development Plan On the afternoon of the 28th, Secretary-General Li Zhihong presided over the first draft of the 12th Five-Year Development Plan for the superhard materials industry drafted by the Secretariat. At the end of 2009, according to the requirements of the Industry Coordination Department of the National Development and Reform Commission and the Equipment Industry Department of the Ministry of Industry and Information Technology, the headquarters of the Association began to prepare for the development of the “12th Five-Year†China Machine Tool Industry Development Plan, and required the clubs to formulate the “Twelfth Five-Year†development of small industries. planning. In order to do a good job in this work, the status quo and future development of the super-hard materials industry will be submitted to relevant state departments on time, and the state will support the industry and introduce a good development policy to guide the healthy development of the industry. The members of the 3rd Technical Expert Committee of the Chapter and the member units wrote the “12th Five-Year Plan†proposals for their respective product fields. After the summary by the Secretariat, the draft was drafted and a heated discussion was held at the conference. Experts and representatives attended the meeting. Actively issued important guiding suggestions. The Secretariat will carefully sort out relevant opinions and revise the draft plan, which will be officially reported to the General Conference at the end of May. Professor Wang Qinsheng, Executive Deputy Director of the Technical Experts Committee, presided over the special report meeting Secretary-General Li Zhihong's report to replace Ding Haishan of Luo axis Niu Liangang, deputy chief engineer of Xi'an Aviation Power Control Co., Ltd. made a report German expert Trenker is making a report Mr. Chen Honglie from Hong Kong Yingmao Company gave a live translation of Mr. Trenker General Manager Xie Zhigang of Guilin Tebang New Materials Co., Ltd. Professor Zhai Zili from the Institute of Atomic and Molecular Physics of Sichuan University Manager Wang Haizhi replaced the general manager of China Southern Airlines Tenglong Ma Ruofei to report on April 29th, and held a special lecture by invited experts. The first is a user industry expert. Ding Haishan, an expert from Luoyang Bearing Research Institute, wrote the article “Application of Superhard Material Tools in Bearing Processingâ€. Since he was unable to attend the meeting, Secretary-General Li Zhihong presided over the speech. Then came the report of “Superhard Material Tools for Aircraft Parts Processing†by Niu Liangang, deputy chief engineer of Xi'an Aerodynamics Control Co., Ltd. Both reports provide detailed information on the application of superhard materials tools in related industries, and provide participants with a more detailed understanding of the application of superhard tools in these areas. This is followed by a report by Mr. Trenker Alfred of Trenker, Germany, “Application and Manufacturing of Superhard Material Plating Tools in the Semiconductor and Optical Industryâ€, translated by Mr. Chen Honglie from Hong Kong Yingmao Company. Trenker gave a detailed introduction with a lot of pictures. Then, Xie Zhigang, general manager of Guilin Tebang New Materials Co., Ltd. and Prof. Zhai Zili, from the Institute of Atomic and Molecular Physics of Sichuan University, respectively, made "the application status and future development of diamond wire saws" and "the future development trend of PDC and PCBN superhard tools". The report benefited the participants. Finally, a new report was added. The manager of Suzhou Daocheng Trading Co., Ltd., Wang Haizhi, presided over the latest report by Ma Ruofei, general manager of Suzhou Nanhang Tenglong Technology Co., Ltd., “one of the most effective ways to stabilize the quality of diamond productsâ€. In this paper, the experimental data proves that the author's new restoration ideas and methods have greatly improved the quality of diamond products, and the test life has increased by 55.3%, and the performance is stable, which has given participants some inspiration. The conference closed successfully after completing the scheduled agenda.
Powder form deformer is mainly used for dry mix mortar which needs less bubbles at mixing stage or wet stage. The mortar can achieve the requirement with supplied product even in a very small dosage, and no negative effect.
Deformer for construction,powder deformer for mortar,polyether based deformer,cement deformer,deforming agent for mortar
Shanghai Na Long Tech Co., Ltd , https://www.na-long.com