9900 Rivet Nut Gun is used for the installation of Rivet Nut made of aluminum, brass, steel, stainless steel, etc. at the size of M3~M12.
Specification:
| Applicable Size | M3~M12 (6-3-1/2) |
| Air Supply Pressure | 5~7 bar (75-~100lbf/in2) |
| Rated Pressure | 5.5bar (75lbf/in2) |
| Riveting Stroke | 7mm (.276in) |
| Motor Rotation Speed | 2,000rmp (on/off) |
| Working Tension | ≥19.1KN (4,300lbf) |
| Noise | <75dB(A) |
| Weight | 2.2kg (4.85lb) |
| Dimension | 280×250×115mm |
9900 Rivet Nut Gun is used for the installation of Rivet Nut made of aluminum, brass, steel, stainless steel, etc. at the size of M3~M12.
Specification:
| Applicable Size | M3~M12 (6-3-1/2) |
| Air Supply Pressure | 5~7 bar (75-~100lbf/in2) |
| Rated Pressure | 5.5bar (75lbf/in2) |
| Riveting Stroke | 7mm (.276in) |
| Motor Rotation Speed | 2,000rmp (on/off) |
| Working Tension | ≥19.1KN (4,300lbf) |
| Noise | <75dB(A) |
| Weight | 2.2kg (4.85lb) |
| Dimension | 280×250×115mm |
The purpose of the pin is to be used as a locating part to determine the exact position of parts in relation to each other, to transmit torque, or as a cutting part in a mounting device.
The pin is a reflection of the internal closed mold state. Whether the mold has been hit in place can be obtained by measuring the data between the upper and lower limit columns. Can also play the role of protection punch, in the upper and lower die separated when the length of the limit column is greater than the punch, can prevent the break of the punch. In continuous dies, the pin protects the die from potential changes in the form during high speed and prolonged overloading shocks.
If the die is of high precision (with many demanding bends), it is necessary to install a limit column, because it enables the die to have a consistent bottom dead point every time it is pressed.
Pin With Hole,Custom Spring Pin,Carbon Steel Pin,Architecture Triangular Pin
Handan Changlan fasteners manufacturing ,.Co ltd , https://www.hdchanglanjgj.com