Closet and hanging cabinet installation quality requirements and construction acceptance standards

The inspection methods for the installation quality of closets and hanging cabinets are as follows.

Cabinets and cabinet frames (horizontal and vertical caskets) produced at the site shall be connected by boring heads (except those made of blockboards).

1. The keel spacing needs to be in line with the standard. Generally, the mid-to-middle spacing of the keel is <15cm, the vertical spacing is <20cm, and the distance between the side panels and the backboard and roof keel is < 20cm and <25cm. The keel spacing of the wooden cabinet panel is <15 cm laterally and <20 cm vertically. You can use the flicking method to test.

2. The surface is smooth and smooth, and the edges and corners are neat and smooth. There should be no burr or hammer marks.

3. When assembling, such as vertical, cross, middle, and mid-range, the gutters should be tightly fitted and glued together with white glue. It cannot be connected with nails.

4. The cover of the surface layer should be flat and firm, and it must not be degummed. There should be a reverse pattern on the surface of the pattern plate, so that the pattern is consistent.

5. The dimensional deviations and acceptance methods for the production of closets and hanging cabinets should comply with the requirements of the table.

Closet and hanging cabinet manufacturing size deviation and acceptance method (mm)

Note: The indicators in this table are based on 1 m, and more than 1 m are analogized by percentage.

Plate

Extra Transparency Self Adhesive Switchable Film

Extra Transparency Switchable Smart Self-Adhesive Film Tint could work in 90% super clear clarity, manufactured with a self-adhesive AB glue layer on one side which makes it easy to stick to both new and existing glass

A simple ON - OFF mode switches the film from being clear (transparent) to frosted (opaque). In its frosted state the film acts as an electronic blind providing privacy and security for any glass, window or partition.

Super Clear Self-Adhesive Intelligent Smart Film is available in widths up to 1830mm and can be cut to any size and any special shape. Custom shapes and sizes are available and multiple pieces can be joined together to create large tempered panels or windows

Extra Transparency Self Adhesive Switchable Film,Non Adheive Smart Film,Transformador Pdlc Smart Film,Dimming Smart Glass Pdlc Film

Shenzhen YuGuang New Material Co.,Ltd , https://www.ygsmartfilm.com

Posted on