First, let's understand what is under the skirting board, skirting board's standard name is "skirting." The baseboard is the connection between the wall and the ground. It plays the role of protection, reduces the deformation of the wall, avoids damage caused by external force collision, scrubbing is very convenient, and can play a decorative effect. The following is just like Xiaobian to understand the type and installation process of the baseboard .
Kinds of baseboards
1, ceramic skirting board : ceramic skirting board is divided into glazed tile baseboard, vitrified tile baseboard.
2, glass skirting board: more fragile, the installation is very simple.
3, stone skirting board: stone material is more durable, suitable for more tiling the walls of the room.
4, wood baseboard: divided into two types of solid wood, density board, the cost is relatively high, the effect is better.
5, PVC skirting board: pvc skirting board is a substitute for wood baseboard, the price is cheaper, visual effects are relatively poor.
Baseboard installation process
First, the installation process of the buckle baseboard
1. Check and clean up: Before installing the skirting board, be sure to clean and inspect the wall first to see if it is flat and clean, so as to ensure that the skirting board after installation is flat and fits tightly with the wall.
2. Draw the line of position: When the position of the skirting board is installed, firstly draw the buckle spacing line and the height position line.
3. Fix the buckle: Use screws to fasten the buckle and washer to the wall.
4, cut down the material: After measuring a good length and size of the material. The size is to subtract or add the yin and yang size.
5, install the skirting board: pre-installed at the corner of the corner or shade angle, to see if the size is accurate, no problem, then you can put the upper slot into the buckle, in the next slot into.
6, to fill the gap: the gap between the baseboard and the wall we use neutral white silicone to fill.
Second, the installation process of gas nailing baseboard
1. Drilling: The layout of hydropower cannot be consistent with the location of the drilling. If the drilling time is too long, the skirting board will be difficult to stick to the wall. Special tools for wall drilling are used.
2. Fixed: After fixing the position of the drill hole, fix the nail to the baseboard. Note that the skirting board should be close to the wall. To make the nails invisible, nails must be fully nailed into the skirting board.
3, handle the corner: In the corner of the corner, the skirting board at the intersection, in the skirting board on the edge cut out a forty-five degree angle, the interface will not look ugly. After the skirting board is trimmed, remember to fix it.
4. Installation points: Screws are special nails for fixing the skirting board. The fixing effect is very good. The skirting board is to make the intersection between the floor and the wall more beautiful. Therefore, when installing the skirting board, it should be close to the wall, especially at the corner, and it is more beautiful without leaving gaps.
Conclusion: The above is small as we introduce the kind of skirting boards and the installation process skirting board, after reading all of the skirting board also understand, we want to help.
Baseboard Installation Baseboard Baseboard
Led Batten Light,Waterproof Led High Bay Light,Led High Bay Light,Led High Bay Lights
JIANGMEN MOSCOT OPTOELECTRONIC TECHNOLOGY CO.,LTD. , https://www.zjsensorsled.com