Seven aspects of the decoration contract that require special attention

When signing a decoration contract, pay attention to the following aspects:

1 time agreement: General 2 bedroom 100 square meters of room, simple decoration, the duration of 35 days or so, decoration companies for insurance, the general will be scheduled to 45-50 days, if you are anxious to stay, you can sign and design Discuss the terms.

2Payment methods: General decoration contract, agreed to pay 60% down payment, after the acceptance of the carpentry pay 35%, pay 5% after completion. If you follow this form of payment, you will already pay about 95% of the cost to the decoration company after the construction period is over half. If there is any problem in the later stages of the renovation, it will be difficult to constrain the decoration company. . Therefore, it is recommended that when signing a contract, the down payment can be reduced to 30%, and 30% in the middle period.

Medium-term payment: The medium-term payment time agreed on the general contract is simply marked with "more than half of the project, carpentry closes." However, a construction site is often a multi-project crossover operation. More than half of the regular construction period should be: the end of wood production; kitchen walls, floor tiles, ceilings; the end of the wall leveling;

3 increase or decrease items: decoration process, it is easy to increase or decrease the project, such as more cabinets, change several meters of water circuit and so on. These must be paid at the time of completion. What should be the unit price of these items? If you wait until you have started work, then this may be the design of the finale. Therefore, if possible, it would be best to make a copy of a complete quotation from the decoration company that was initially shown to you so as not to change the price of the decoration company when signing a contract or increasing or decreasing a project.

It is also important to note that when you finalize the fees, the increase or decrease you should pay should be signed and approved by you before construction of the project. If you did not sign the agreement, you can not pay the corresponding fees.

4 Warranty Clause: The entire process of renovation is mainly based on manual on-site production. It has not achieved full-scale industrialization, so it is inevitable that there will be a variety of fine-quality problems. During the warranty period, the responsibility of the decoration company should be particularly important. For example, if there is a problem, the decoration company is responsible for the entire warranty, whether it is only the contractor, is not responsible for the material warranty, or there are other restrictions, which must be clearly written in the contract.

5 Hydropower costs: During the renovation process, on-site construction will use water, electricity and gas. Generally speaking, at the end of the project, the utility bills add up to a number that is not a small sum. The cost should be paid by anyone and should be indicated in the contract.

6 Construction according to the plan: In strict accordance with the drawings that you have signed and approved, if you do not meet the details in the details and your design drawings, you can request rework.

7 Time and frequency of supervision and quality inspection: The general decoration companies distribute the project to each construction team. The quality inspection personnel and supervision are the most important supervision methods for the decoration companies. They visit the time interval, and they work on the project. The quality is particularly important. Supervisors and quality inspections should arrive once every 2 days. The design should also be presented 3-5 days at a time to see if the on-site construction results are in line with your own design.

Entrance decoration study decoration decoration design decoration decoration company room square meters decoration decoration decoration company please kitchen ceiling cupboard

Hydraulic Valve

A hydraulic valve is a device used to control the flow and pressure of hydraulic fluid in a hydraulic system. It is typically made up of a valve body, which contains the necessary ports and passages for fluid flow, and a valve spool or poppet, which is responsible for regulating the flow of fluid.

Hydraulic valves can be classified into various types based on their function and design. Some common types include:

1. Directional control valves: These valves control the direction of fluid flow in a hydraulic system. They typically have multiple ports and can be used to control the movement of hydraulic cylinders or motors.

2. Pressure control valves: These valves regulate the pressure of the hydraulic fluid in a system. They can be used to maintain a specific pressure level or limit the maximum pressure.

3. Flow control valves: These valves control the rate of fluid flow in a hydraulic system. They can be used to adjust the speed of hydraulic cylinders or control the flow to different actuators.

4. Check valves: These valves allow fluid flow in one direction while preventing it from flowing back in the opposite direction. They are commonly used to maintain pressure in hydraulic systems or prevent backflow.

Hydraulic valves are essential components in hydraulic systems, as they enable precise control and efficient operation. They are commonly used in various industries, including manufacturing, construction, agriculture, and automotive.

Hydraulic Valve,Hydraulic Throttle Valve,Hydraulic Spare Part Throttle,Hydraulic Accessory Throttle Valve

Yantai Dongyue Hydraulic Technology Co., Ltd , https://www.deeleap.com

Posted on