In addition to the inspection of the renovation project, it is also very important to check the house. In general, the inspection room is in the half-month after the renovation is completed, then check the housing inspection process is what? Today Xiao Bian and everyone together to find out about the inspection room inspection process related presentations, we can all come to understand Oh!
Check room inspection process
1, no dripping wall seamless
The inspection of the wall is preferred to see if the wall is flat, and then it is to see if the wall has water seepage and cracks. In particular, look at the wall for water. If any of these phenomena occur, you need to find out the reason immediately. If there is a crack in the balcony, then there is a great danger. In general, the cracks on the wall surface are mostly not structural cracks, and they are not dangerous. Only the cracks in the balcony represent the structural problems of the house. In the event of a crack in the joint between the room and the balcony, it is likely to be a sign of the breakage of the balcony. The relevant unit must be notified immediately.
2, five cards and two books
People who have just bought a house do not quite understand the five books and the two books. Actually, the five certificates and the second book contain state-owned land use permits and pre-sale permits. The two certificates must be carefully read and must be read. When signing a contract, be sure to understand clearly whether the house you want to purchase has this certificate and sign the contract after you have confirmed that the formalities are complete.
3, use a hammer to tap the wall to prevent cracks
You can use a small hoe or a hammer to gently tap against the wall and floor covering to see if the wall and floor are empty. If you hear the voice of "emptiness," that is, each surface is in contact with the wall (ground) surface and must be reworked. If you hear a dull knock, it means that they are in good contact. This home inspection knowledge needs to be mastered!
4, see the contract nuclear area
There must be related brands and related quantities of famous facilities and equipment on the sales contract. We must carefully look at the contract and check whether the above label is the same as the reality and whether there are any missing places. The area of ​​the house is not the same as the contract, whether it has actually been measured by the real estate department.
5, see the sewer with or without plugging
To see if there is any plugging in the sewer, you must first bring your own tools: plastic bags, sand, and a plastic basin. A pot of water is filled first, and water is poured from each sewage pipe. Basically, each sink should be filled with two pots of water. The sound of squeaking should be heard and there is no water on the surface. You can also open the faucet, make the water flow as large as possible, anxiously, look at the water pressure, and then try the drainage speed.
The above is to give you the introduction of home inspection process , after reading the home inspection room is not more understanding? Hope that the above can help everyone, if you want to know other relevant information, more exciting, please look forward to !
Home inspection house renovation house
Needle Nose Pliers,Vice Grips,Long Nose Pliers,Combination Pliers
Ningbo Hoya Electronic Commerce Co., LTD , https://www.jauhitools.com