The Yangtze River Delta, with Jiangsu, Zhejiang, and Shanghai as its centers, is one of the regions with a relatively high degree of economic development in China. The economic development has driven the development of the aluminum processing industry. The Yangtze River Delta is also one of the more developed areas in the aluminum processing industry in the country, especially in the aluminum sheet and strip industry. In 2004, the output of aluminum in Jiangsu, Zhejiang, and Shanghai was 370,800 tons, 305,900 tons and 92,500 tons respectively, which ranked third, fourth, and eleventh in aluminum production in the country. The output of aluminum in the two provinces and cities reached 768,200 tons, accounting for 17.47% of the total aluminum output in the country. Among them, the output of aluminum strip is close to 180,000 tons, accounting for 14.75% of the total output of aluminum strip in the country.
At the China Aluminum Strip Forum recently held, Luo Yanru, secretary-general of the Shanghai Aluminum Industry Association, said that at present, the aluminum processing industry in the Yangtze River Delta is continuously accelerating the pace of transformation and restructuring and entering a new round of industrial upgrading. The success of the new round of industrial upgrading of the aluminum processing industry in the Yangtze River Delta will significantly increase the production capacity of aluminum foil and foil in the region, which will in turn increase the overall strength and core competitiveness of the aluminum foil and foil processing industry.
A new round of industrial upgrading
Shanghai first opened the curtain for the upgrading of the aluminum processing industry in the Yangtze River Delta. The successful transformation of the Shanghai Aluminum Factory's broad-width aluminum foil project marks the success and origin of the introduction of foreign advanced aluminum processing technology and equipment in the Yangtze River Delta region and even the whole country. Since the beginning of the new century, the aluminum processing industry in Jiangsu Province and Zhejiang Province has also stepped onto the stage of industrial upgrading.
The first is the completion and production of Jiangsu Daya Aluminum Co., Ltd. The company produced 12,000 tons of double-zero aluminum foil in 2004, second only to the production of double-null aluminum foil of Xiamen Shunshun Aluminum Co., Ltd., ranking the second in the country. It is a flag of China's private double-zero aluminum foil production enterprises. At present, in Kunshan City, Jiangsu Province, Yuncheng (Kunshan) Aluminum Co., Ltd., another private enterprise, is under construction. After it is completed, it will specialize in the production of automotive air-conditioner strips with a design capacity of 60,000 tons per year. In Jiangyin City, Jiangsu Province, the signing ceremony for Jiangyin New Unicom Printing Co., Ltd. to import three 2000mm foil mills from Ashenbach has been held. The project is planned to be completed and put into operation in March 2006 with a designed capacity of 20,000 tons per year. Aluminum foil. In Zhenjiang City, Jiangsu Province, Zhenjiang Dingsheng Aluminum Co., Ltd., with an aluminum sheet and foil total production capacity of up to 100,000 tons/year, is under construction. After the completion of all the projects, the company will become China's own continuous casting machine (10 units). Many businesses. At the same time, following the technical transformation of Jiangsu Changlu Aluminum Co., Ltd., located in Changshu, Jiangsu, the total production capacity of aluminum foil and foil is approximately 70,000 tons/year.
Zhejiang aluminum strip industry has been upgraded and developed faster. In 2004, the statistics of aluminum strip production of 8 enterprises in Zhejiang Province showed that the total amount of aluminum plate and foil was nearly 75,000 tons. These enterprises are Ningbo Fubon Lean Group Co., Ltd. aluminum plant (24,341 tons), and Shaoxing Donghu non-ferrous metal rolling limited. Company (16,720 tons), Zhejiang General Aluminum Industry Co., Ltd. (original Libo Company, 7,983 tons), Hangzhou Southeast Aluminum Strip Co., Ltd. (7675 tons), Ningbo Weir Metal Products Co., Ltd. (6657 tons), Wenzhou Aluminum Products Factory (5500 tons), Cixi Dongbao Industrial Aluminum Co., Ltd. (3000 tons), and Jiaxing Non-ferrous Metals Calendering Plant (2850 tons). Since 2005, the production capacity of the four-high aluminum foil and foil rolling mill under construction and already under construction in Zhejiang Province has reached 208,000 tons/year. These companies are: Taizhou Juke Aluminum (70,000 tons/year), Ningbo Fubang Aluminum (40,000 tons/year), Ningbo Huayang Aluminum (35,000 tons/year), Hangzhou Southeast Aluminum (20,000 yuan Tons/year), Shaoxing majority aluminum industry (20,000 tons/year), Shaoxing Vision Aluminum Industry (20,000 tons/year), Zhejiang Wantai Aluminum Industry (0.3 million tons/year). After all these projects are completed, Zhejiang Province will become one of the provinces and cities with large aluminum foil and foil processing in China.
The overall level continues to increase
The aluminum strip industry in the Yangtze River Delta region started early and is the birthplace of China's modern aluminum processing industry. It has been developed for more than 70 years. Since the 1980s, the reform and opening up has brought the aluminum strip industry in the Yangtze River Delta region to a period of gold development. A group of aluminum strip manufacturers with advanced technology and equipment have appeared on the land in the Yangtze River Delta region, including: Jiangsu Daya Group Danyang Aluminum Processing Plant, Alcoa (Shanghai) Aluminum Industry Co., Ltd., Sapa Aluminum Heat Transmission (Shanghai) Co., Ltd., Zhejiang Juke Aluminum Co., Ltd., etc.; a group of old enterprises also rejuvenated their youth through transformation and restructuring, such as Xuzhou. Sifang Aluminum Group Co., Ltd., Ningbo Fubang Lean Group Co., Ltd. aluminum factory. Zhenjiang Dingsheng Aluminum Co., Ltd. and Ningbo Huayang Aluminum Co., Ltd., which are under construction, will be the new force in the aluminum strip industry in the Yangtze River Delta Region. The improvement and improvement of the level of aluminum strip and strip equipment has brought about significant improvement and improvement in the overall technical equipment level of the aluminum strip industry in the Yangtze River Delta Region, which has created a new situation in which aluminum strip production in the Yangtze River Delta region has increased year by year.
Luo Yanru believes that in recent years, with the improvement and improvement of technical equipment, the varieties of aluminum strip in the Yangtze River Delta have increased, and the quality has improved. The market share of some aluminum strips has been greatly improved. For example, Sapa Aluminum Heat Transfer (Shanghai) Co., Ltd.'s aluminum alloy composite tape is a high-value-added product with a domestic market share of more than 80%. Xuzhou Sifang Aluminum and Ningbo Fubang Aluminum are also on the market. Very popular. There is also a 3003 alloy alloy sheet produced by Ningbo Weil Metal Products Co., Ltd. Due to its high quality, it is very popular among aluminum product brand companies. Zhejiang Juke Aluminum Co., Ltd., which was put into production on March 18, 2005, is based on the research, development and production of aluminum alloy plates for automobiles and warships. In the near future, the production of aluminum strips in the Yangtze River Delta region will be more prosperous. Meteorology, not only will product quality have greater improvement, high value-added aluminum strip will also be listed continuously to meet the development needs of all walks of life.
In the past 20 years, the structure of the aluminum strip industrial enterprises in the Yangtze River Delta has also undergone major changes. Some aluminum strip manufacturing companies with long history, old equipment, poor technology, small products, and small scale are basically private enterprises, joint ventures, and foreign companies. The sole proprietorship was replaced, especially in Shanghai. It is these emerging non-state-owned aluminum sheet and strip processing companies that have become the main force in the aluminum strip industry in the Yangtze River Delta region. Some enterprises have transformed themselves into joint-stock systems through modern enterprise system construction. The large-scale state-owned aluminum strip companies have become rare.
At present, in the Yangtze River Delta region, there are seven aluminum rolling products with an annual output of more than 10,000 tons. In 2004, Xuzhou Sifang Aluminum Group Co., Ltd. produced a total of 34,497 tons of aluminum plate strips, ranking seventh in the country. Modern casting and rolling mills, single-stand double-winding hot-rolling mills, and irreversible four-high mills have become the leading equipment for aluminum sheet and strip processing in the Yangtze River Delta region.
Scale and innovation are still major issues
With the continuous development of the economy and the continuous improvement of people’s living standards, the consumption of aluminum sheet and strip is continuously increasing. In 2004, the total consumption of aluminum strip in China was 1.58 million tons, an increase of 8.1% over the same period of last year. According to the forecast of experts, by 2010, the total consumption of aluminum sheet and strip will be close to 2.5 million tons. At present, the packaging industry, construction industry, and transportation industry are the three major consumer areas for aluminum sheet and strip in China. The Yangtze River Delta is also one of the areas with large aluminum consumption in China. The construction industry in the two provinces and one city is growing at a rapid rate. The usage of aluminum panels, aluminum alloy decorative panels and composite panels for curtain walls is very large. In terms of transportation, the use of a variety of aluminum plates in the sky, on the road, and on the track upwards; the use of PS plate substrates for printing, radiator radiators for air conditioners, and air-conditioners for dual-metal composite tapes, etc. fast. It is estimated that in the past few years, the annual demand for aluminum strip in the Yangtze River Delta region is around 150,000 tons, which provides ample room for development in the aluminum strip industry in the Yangtze River Delta Region.
However, the scale of enterprises and technological innovation are still a major bottleneck restricting the further development of aluminum strip companies in the Yangtze River Delta region. Luo Yanru said that for a long time, there are so-called "two more and two less" phenomena in the aluminum strip in the Yangtze River Delta region, that is, there are many conventional products in the low-grade and large-grade goods, and there are fewer high-end and high-quality rare new products; rough processing and low additional The value of many products, deep processing, high value-added products. The scale of the company is small and its strength is weak. The lack of technological innovation ability of enterprises affects development.
Although the aluminum strip industry in the Yangtze River Delta started early, there are many small and medium-sized companies with large resistance to risks. Although the total output of aluminum sheet and strip accounts for 14.75% of the national total, the single-company aluminum sheet strip production ranks among domestic counterparts are still far less than companies in other regions. The strength of the aluminum strip industry in the Yangtze River Delta region is not yet strong, and it is necessary to make it bigger and stronger, yet it has yet to be completed and put into operation and the emergence of large-scale group companies.
In the aluminum strip industry in the Yangtze River Delta region, the material types are old faces, mainly pure aluminum, a small amount of 3003 alloys, and other alloy series strips are rarer. The product specifications are the same, and the ultra-thin, ultra-thin and special-required aluminum sheet strips cannot be produced yet. These phenomena reflect the lack of technological innovation capability in the aluminum strip industry in the Yangtze River Delta region. At present, the aluminum triangle belt industry in the Yangtze River Delta region is faced with a heavy task of technological innovation. It is necessary to take the scientific concept of development as a guide and strive to carry out innovative activities centering on products, technology, energy conservation, material saving, and environmental protection.
At present, the aluminum strip industry in the Yangtze River Delta faces severe challenges. Foreign aluminum companies began to infiltrate into China's aluminum processing industry, and entered the Chinese market with its brand advantages, technological advantages, and product advantages. The Yangtze River Delta region bears the brunt of this, making domestic companies passive in the competition. Luo Yanru believes that in this situation, companies should take the scientific concept of development as a guide, focusing on products, technology, energy conservation, materials, environmental protection and other aspects, and strive to carry out innovative activities. In order to be internationally competitive, the aluminum strip industry in the Yangtze River Delta region should speed up the transformation and take steps to reorganize and reorganize, and jointly establish a large-scale aluminum strip processing joint-stock group company.
At the China Aluminum Strip Forum recently held, Luo Yanru, secretary-general of the Shanghai Aluminum Industry Association, said that at present, the aluminum processing industry in the Yangtze River Delta is continuously accelerating the pace of transformation and restructuring and entering a new round of industrial upgrading. The success of the new round of industrial upgrading of the aluminum processing industry in the Yangtze River Delta will significantly increase the production capacity of aluminum foil and foil in the region, which will in turn increase the overall strength and core competitiveness of the aluminum foil and foil processing industry.
A new round of industrial upgrading
Shanghai first opened the curtain for the upgrading of the aluminum processing industry in the Yangtze River Delta. The successful transformation of the Shanghai Aluminum Factory's broad-width aluminum foil project marks the success and origin of the introduction of foreign advanced aluminum processing technology and equipment in the Yangtze River Delta region and even the whole country. Since the beginning of the new century, the aluminum processing industry in Jiangsu Province and Zhejiang Province has also stepped onto the stage of industrial upgrading.
The first is the completion and production of Jiangsu Daya Aluminum Co., Ltd. The company produced 12,000 tons of double-zero aluminum foil in 2004, second only to the production of double-null aluminum foil of Xiamen Shunshun Aluminum Co., Ltd., ranking the second in the country. It is a flag of China's private double-zero aluminum foil production enterprises. At present, in Kunshan City, Jiangsu Province, Yuncheng (Kunshan) Aluminum Co., Ltd., another private enterprise, is under construction. After it is completed, it will specialize in the production of automotive air-conditioner strips with a design capacity of 60,000 tons per year. In Jiangyin City, Jiangsu Province, the signing ceremony for Jiangyin New Unicom Printing Co., Ltd. to import three 2000mm foil mills from Ashenbach has been held. The project is planned to be completed and put into operation in March 2006 with a designed capacity of 20,000 tons per year. Aluminum foil. In Zhenjiang City, Jiangsu Province, Zhenjiang Dingsheng Aluminum Co., Ltd., with an aluminum sheet and foil total production capacity of up to 100,000 tons/year, is under construction. After the completion of all the projects, the company will become China's own continuous casting machine (10 units). Many businesses. At the same time, following the technical transformation of Jiangsu Changlu Aluminum Co., Ltd., located in Changshu, Jiangsu, the total production capacity of aluminum foil and foil is approximately 70,000 tons/year.
Zhejiang aluminum strip industry has been upgraded and developed faster. In 2004, the statistics of aluminum strip production of 8 enterprises in Zhejiang Province showed that the total amount of aluminum plate and foil was nearly 75,000 tons. These enterprises are Ningbo Fubon Lean Group Co., Ltd. aluminum plant (24,341 tons), and Shaoxing Donghu non-ferrous metal rolling limited. Company (16,720 tons), Zhejiang General Aluminum Industry Co., Ltd. (original Libo Company, 7,983 tons), Hangzhou Southeast Aluminum Strip Co., Ltd. (7675 tons), Ningbo Weir Metal Products Co., Ltd. (6657 tons), Wenzhou Aluminum Products Factory (5500 tons), Cixi Dongbao Industrial Aluminum Co., Ltd. (3000 tons), and Jiaxing Non-ferrous Metals Calendering Plant (2850 tons). Since 2005, the production capacity of the four-high aluminum foil and foil rolling mill under construction and already under construction in Zhejiang Province has reached 208,000 tons/year. These companies are: Taizhou Juke Aluminum (70,000 tons/year), Ningbo Fubang Aluminum (40,000 tons/year), Ningbo Huayang Aluminum (35,000 tons/year), Hangzhou Southeast Aluminum (20,000 yuan Tons/year), Shaoxing majority aluminum industry (20,000 tons/year), Shaoxing Vision Aluminum Industry (20,000 tons/year), Zhejiang Wantai Aluminum Industry (0.3 million tons/year). After all these projects are completed, Zhejiang Province will become one of the provinces and cities with large aluminum foil and foil processing in China.
The overall level continues to increase
The aluminum strip industry in the Yangtze River Delta region started early and is the birthplace of China's modern aluminum processing industry. It has been developed for more than 70 years. Since the 1980s, the reform and opening up has brought the aluminum strip industry in the Yangtze River Delta region to a period of gold development. A group of aluminum strip manufacturers with advanced technology and equipment have appeared on the land in the Yangtze River Delta region, including: Jiangsu Daya Group Danyang Aluminum Processing Plant, Alcoa (Shanghai) Aluminum Industry Co., Ltd., Sapa Aluminum Heat Transmission (Shanghai) Co., Ltd., Zhejiang Juke Aluminum Co., Ltd., etc.; a group of old enterprises also rejuvenated their youth through transformation and restructuring, such as Xuzhou. Sifang Aluminum Group Co., Ltd., Ningbo Fubang Lean Group Co., Ltd. aluminum factory. Zhenjiang Dingsheng Aluminum Co., Ltd. and Ningbo Huayang Aluminum Co., Ltd., which are under construction, will be the new force in the aluminum strip industry in the Yangtze River Delta Region. The improvement and improvement of the level of aluminum strip and strip equipment has brought about significant improvement and improvement in the overall technical equipment level of the aluminum strip industry in the Yangtze River Delta Region, which has created a new situation in which aluminum strip production in the Yangtze River Delta region has increased year by year.
Luo Yanru believes that in recent years, with the improvement and improvement of technical equipment, the varieties of aluminum strip in the Yangtze River Delta have increased, and the quality has improved. The market share of some aluminum strips has been greatly improved. For example, Sapa Aluminum Heat Transfer (Shanghai) Co., Ltd.'s aluminum alloy composite tape is a high-value-added product with a domestic market share of more than 80%. Xuzhou Sifang Aluminum and Ningbo Fubang Aluminum are also on the market. Very popular. There is also a 3003 alloy alloy sheet produced by Ningbo Weil Metal Products Co., Ltd. Due to its high quality, it is very popular among aluminum product brand companies. Zhejiang Juke Aluminum Co., Ltd., which was put into production on March 18, 2005, is based on the research, development and production of aluminum alloy plates for automobiles and warships. In the near future, the production of aluminum strips in the Yangtze River Delta region will be more prosperous. Meteorology, not only will product quality have greater improvement, high value-added aluminum strip will also be listed continuously to meet the development needs of all walks of life.
In the past 20 years, the structure of the aluminum strip industrial enterprises in the Yangtze River Delta has also undergone major changes. Some aluminum strip manufacturing companies with long history, old equipment, poor technology, small products, and small scale are basically private enterprises, joint ventures, and foreign companies. The sole proprietorship was replaced, especially in Shanghai. It is these emerging non-state-owned aluminum sheet and strip processing companies that have become the main force in the aluminum strip industry in the Yangtze River Delta region. Some enterprises have transformed themselves into joint-stock systems through modern enterprise system construction. The large-scale state-owned aluminum strip companies have become rare.
At present, in the Yangtze River Delta region, there are seven aluminum rolling products with an annual output of more than 10,000 tons. In 2004, Xuzhou Sifang Aluminum Group Co., Ltd. produced a total of 34,497 tons of aluminum plate strips, ranking seventh in the country. Modern casting and rolling mills, single-stand double-winding hot-rolling mills, and irreversible four-high mills have become the leading equipment for aluminum sheet and strip processing in the Yangtze River Delta region.
Scale and innovation are still major issues
With the continuous development of the economy and the continuous improvement of people’s living standards, the consumption of aluminum sheet and strip is continuously increasing. In 2004, the total consumption of aluminum strip in China was 1.58 million tons, an increase of 8.1% over the same period of last year. According to the forecast of experts, by 2010, the total consumption of aluminum sheet and strip will be close to 2.5 million tons. At present, the packaging industry, construction industry, and transportation industry are the three major consumer areas for aluminum sheet and strip in China. The Yangtze River Delta is also one of the areas with large aluminum consumption in China. The construction industry in the two provinces and one city is growing at a rapid rate. The usage of aluminum panels, aluminum alloy decorative panels and composite panels for curtain walls is very large. In terms of transportation, the use of a variety of aluminum plates in the sky, on the road, and on the track upwards; the use of PS plate substrates for printing, radiator radiators for air conditioners, and air-conditioners for dual-metal composite tapes, etc. fast. It is estimated that in the past few years, the annual demand for aluminum strip in the Yangtze River Delta region is around 150,000 tons, which provides ample room for development in the aluminum strip industry in the Yangtze River Delta Region.
However, the scale of enterprises and technological innovation are still a major bottleneck restricting the further development of aluminum strip companies in the Yangtze River Delta region. Luo Yanru said that for a long time, there are so-called "two more and two less" phenomena in the aluminum strip in the Yangtze River Delta region, that is, there are many conventional products in the low-grade and large-grade goods, and there are fewer high-end and high-quality rare new products; rough processing and low additional The value of many products, deep processing, high value-added products. The scale of the company is small and its strength is weak. The lack of technological innovation ability of enterprises affects development.
Although the aluminum strip industry in the Yangtze River Delta started early, there are many small and medium-sized companies with large resistance to risks. Although the total output of aluminum sheet and strip accounts for 14.75% of the national total, the single-company aluminum sheet strip production ranks among domestic counterparts are still far less than companies in other regions. The strength of the aluminum strip industry in the Yangtze River Delta region is not yet strong, and it is necessary to make it bigger and stronger, yet it has yet to be completed and put into operation and the emergence of large-scale group companies.
In the aluminum strip industry in the Yangtze River Delta region, the material types are old faces, mainly pure aluminum, a small amount of 3003 alloys, and other alloy series strips are rarer. The product specifications are the same, and the ultra-thin, ultra-thin and special-required aluminum sheet strips cannot be produced yet. These phenomena reflect the lack of technological innovation capability in the aluminum strip industry in the Yangtze River Delta region. At present, the aluminum triangle belt industry in the Yangtze River Delta region is faced with a heavy task of technological innovation. It is necessary to take the scientific concept of development as a guide and strive to carry out innovative activities centering on products, technology, energy conservation, material saving, and environmental protection.
At present, the aluminum strip industry in the Yangtze River Delta faces severe challenges. Foreign aluminum companies began to infiltrate into China's aluminum processing industry, and entered the Chinese market with its brand advantages, technological advantages, and product advantages. The Yangtze River Delta region bears the brunt of this, making domestic companies passive in the competition. Luo Yanru believes that in this situation, companies should take the scientific concept of development as a guide, focusing on products, technology, energy conservation, materials, environmental protection and other aspects, and strive to carry out innovative activities. In order to be internationally competitive, the aluminum strip industry in the Yangtze River Delta region should speed up the transformation and take steps to reorganize and reorganize, and jointly establish a large-scale aluminum strip processing joint-stock group company.
Precession Vortex Flowmeter,Precession Vortex Flow Meter,Precession Vortex Gas Flow Meter,Hydraulic Flow Meter
Wuxi Winsun Automation Instrument Co., Ltd , https://www.jswxwinsun.com