As winter arrives, more and more families use radiators for heating to survive the cold and wet winter. Well what a radiator does? What is the stress of radiator placement? Following Xiaobian look at it.
What is a good radiator
1, copper and aluminum composite radiator: the use of copper anti-corrosion features, in the radiator tube using copper, the external use of good heat aluminum wings, seemingly perfect combination, can have fatal flaws: copper radiator wall, generally very Thin, but China's heating water quality is very bad, there are a lot of hard impurities, plus copper itself is very soft, it is easy to wear, often copper and aluminum composite pipe explosion occurred. In addition, the difference in the thermal expansion coefficient between copper and aluminum is large. After a long time, the phenomenon of “off the core†will occur, and the heat dissipation rate will be greatly reduced.
2, stainless steel aluminum composite radiator: In the copper-aluminum composite radiator based on the upgrade, stainless steel is not only anti-corrosion, but also hard, but stainless steel welding technology is not as mature as steel radiator welding mature, so choose large brand manufacturers can also, small brand Use it with caution.
3, aluminum alloy radiator: First of all, the aluminum radiator is definitely not used in China's central heating system. However, for wall-hung boiler heating, aluminum alloy radiators for wall-hung boilers are currently available on the market. The internal tubes are small and the heat dissipation is large. This is a very good energy-saving option for heating.
4, steel radiator: The most common products on the market, suitable for centralized heating, modeling more, because the steel can not be anti-corrosion, in the purchase should pay attention to the internal corrosion, in order to ensure the circulation, but also should choose large water products.
Radiator with stress
1, rather not high
Hot air is flowing upwards. If the radiator is hung too high, the heat at the top of the room is easily concentrated. The actual temperature felt by the person is lower than the design temperature, which not only causes energy waste, but also increases the user's heating costs.
2, as much as possible installed under the window
Under the window is a place with strong “cold radiation†because the temperature of the windows in the room is the lowest, and the descending air currents are mostly concentrated in this area. If a properly sized radiator is installed under the window, cold radiation and cold air circulation can be prevented. When a person approaches a cold window, cold air intrusion is not clearly felt. Especially in the rooms with floor-to-ceiling windows and large bay windows, short heat sinks are installed under the windows to enhance thermal comfort.
3, as far as possible in the area where people often activities
3.1 The living room radiator is recommended to be installed near the sofa. Usually people spend longer time on the sofa.
3.2 The restaurant is undoubtedly installed next to the dining table. If the guest room is connected, it is recommended that the radiator be placed diagonally to enhance convection.
3.3 The toilet is usually installed on the toilet top and side, but it is not recommended to install in the shower area, because the bathroom radiator steel is more likely to cause corrosion.
Editor's summary: What about a good radiator is introduced here. For more information, you can follow this site information.
Radiator installation
Tote Bags,Canvas Tote Bag,Cotton Canvas Tote Bag,Gift Monogram Tote Bag
Dongguan C.Y. RedApple Industrial Limited , https://www.redapplebags.com