Choose a suitable space location, according to the actual size of raw drinking fountains and pre-filter, we must leave space for replacing the filter.
Runtai Decoration    Leiyang Decoration
Both the drinking machine, the pre-filter and the filter element must be mounted vertically on a wall that supports their working weight and must not be turned upside down. The installation pipeline should be as short as possible. The inlet and outlet connectors must be connected in the direction indicated by the correct arrow, and they must be impermeable.
Newly installed filter elements should first pass through the maximum flow of water for at least five minutes (referred to as “activationâ€) to filter the air in the filter elements and lines, and apply the microscopically purified patent formula to the multi-pleat filter element. , to get the best filtration effect and extend the life of the filter.
When the raw water output becomes too small (multiple pleated filter body is saturated) or the filtered water has an odor (the micro-purification patent formula is saturated), the filter element should be replaced, and the time is based on the local water quality and hygiene. The amount of drinking machine may vary. The saturation time of the micro-purified patent formula and multi-pleated filter body will be different depending on the water pollution situation in different regions, and the saturation may be different in different regions.
The filter of the pre-filter is recommended to be replaced at least once every six months to maintain and prolong the service life of the drinking fountain filter. The filter element of the pre-filter is forbidden to wash with water. If raw drinks and pre-filters are dirty, do not use alcohol, banana water or other chemical reagents. Simply wipe with a damp clean towel.
Buy Materials Building Materials Knowledge Space Renderings Space Decoration
A steel tape measure is necessary at home. For DIY fanciers, it can tell you how much the material you will need. For constructors, it helps to calculate the space.
The self marking DIY steel tape measure is a professional measuring tool that should be a wonderful addition to your home.
Features
1> Strong Belt Clip and a sling that can be hung for convenient storage
2> Rubber case protects the inner mechanism and the tape
3> Bold black number marking in white blade for excellent contrast
About Materials
The tape measure is made of ABS case covered with TPR, 65Mn steel tape. All the materials are eco-friendly, which pass ROHS and EN-71 tests.
Standard case color is yellow. When quantity meets 3000pcs, case colors can be customized according to pantone code.
The tape can be matt or polished, as well as nylon coated tape.
1. Yellow case
2. Transparent one
3. Yelllow case with rubber, the rubber case protects the whole construction from dirt, impact and abrasion.
4. White auto-lock
5. Yellow round case - with nylon tape
About Custom Logo
Custom logo is available.
For 1-2 colors logo, we will use silk printing
For full color logo, we will print it with heat transfer printing.
And we also make normal sticker or epoxy plate logo sticker for single color or full color logo
About Measurements of Scale
Two types of measurements
1. cm and inch on one side, tape in yellow with black and red scales
2. cm only on one side, tape in white with black and red scales
About Sizes
For Standard sizes we have tape measure in length of 3m/10ft, and in width19mm, also scale with only cm on one side
5m/16ft*19mm or 5m*19mm, for 5m, we have a wider one ,in width of 25mm
7.5m/25ft*25mm or 7.5m*25mm
8m and 10m, in width of 25mm
We can add magnetic hook at the end of the tape
16 Feet Steel Measuring Tape,16 Feet Rubber Tape Measure, Rubber Steel Tape Measure, Hardware Steel Measuring Tape, Rubber Coated Tape Measure, Rubber Coated Measuring Tape
Wintape Measuring Tape Company , https://www.wintapetapemeasure.com