We introduced how to buy wallpapers. Everyone must also want to know the wallpapering process. Paving wallpaper, lay people may think this is a very simple job, in fact, in order to paste the surface looks perfect, after construction, no fall off, bubbling and other phenomena, but also a very particular thing.
1. Eradicate the wall. Remove the original paint, wallpaper and other objects on the wall. If there are cracks or potholes on the wall, use gypsum powder to replenish these areas and put a bandage on the surface; if there is a dusty wall or a partition wall, stick a glass cloth or a good cloth; some poor quality partitions Or the external wall to achieve the effect of insulation, full nail plasterboard.
2. Brush base oil. Alkyd varnish evenly brushed on the wall, moderate thickness.
3. Putty putty, polished. Twice putty on the wall. After the putty is allowed to dry, sand the surface of the wall with sandpaper to remove uneven granules and make the wall smooth and flat.
4. Cover oil. Once again, clean the walls evenly with clear oil, not too thick. This will prevent the walls from absorbing the wallpaper glue, sticking the wallpaper on the wall and making the walls even.
5. Crop wallpaper. Clipping wallpapers also have regularity, such as the problem of each wallpaper and the adjoining two wallpaper colors, pattern neatness, and the same size.
6. Sticker wallpaper. After evenly applying the wallpaper glue to the wallpaper with a roller, it takes a while for the thicker wallpaper. When starting the wallpaper, for the seams, the two adjacent wallpapers are squeezed on both sides to make them fit. Then the scraper is used to press the seams and clean the extruded glue. After the wallpaper is pasted, use the scraper to paste the wallpaper from top to bottom.
1. Eradicate the wall. Remove the original paint, wallpaper and other objects on the wall. If there are cracks or potholes on the wall, use gypsum powder to replenish these areas and put a bandage on the surface; if there is a dusty wall or a partition wall, stick a glass cloth or a good cloth; some poor quality partitions Or the external wall to achieve the effect of insulation, full nail plasterboard.
2. Brush base oil. Alkyd varnish evenly brushed on the wall, moderate thickness.
3. Putty putty, polished. Twice putty on the wall. After the putty is allowed to dry, sand the surface of the wall with sandpaper to remove uneven granules and make the wall smooth and flat.
4. Cover oil. Once again, clean the walls evenly with clear oil, not too thick. This will prevent the walls from absorbing the wallpaper glue, sticking the wallpaper on the wall and making the walls even.
5. Crop wallpaper. Clipping wallpapers also have regularity, such as the problem of each wallpaper and the adjoining two wallpaper colors, pattern neatness, and the same size.
6. Sticker wallpaper. After evenly applying the wallpaper glue to the wallpaper with a roller, it takes a while for the thicker wallpaper. When starting the wallpaper, for the seams, the two adjacent wallpapers are squeezed on both sides to make them fit. Then the scraper is used to press the seams and clean the extruded glue. After the wallpaper is pasted, use the scraper to paste the wallpaper from top to bottom.
Three trees paint wallpaper glass paint paint craft glass
Plug-In Reading Lamps,Plug In Reading Lamps,Plug In Reading Sconce,Plug In Wall Reading Lamp
Ningbo Deamak Star Intelligent Technology Co., Ltd , https://www.deamakstar.com