The wall is one of the more important structures in the house. If it is handled badly, it will affect the effect of the entire home, and it may also bring bad emotions. So what kind of process is the decoration of a new house ? It looks very simple, in fact, the steps are still quite a lot, the following may wish to look at Xiaobian for everyone to bring the new house wall decoration steps!
New house wall decoration steps
1. Inspection and treatment of the wall base
The first thing to do is to observe the surface of the surface and solve it according to the situation. If it is a rough cement, check whether it is smooth and solid enough. If there is a hollow phenomenon, if there is cracks, holes or empty drums, it should reflect with the developer. And ask for repairs; if it is a white wall, then in order to live in the long term, its quality is very important, test its water resistance, if the water resistance is not good, it is best to shovel out to do again, otherwise it will be skinned in the future.
2. Finished product protection
Whether it is the inspection of the surface or the protection of the finished product, it is an early stage of work. Although it is a preparation stage, it cannot be ignored. At this time, woodworking and floor tiles have entered the field and all need to be protected because dust, paint and other things are easy to fix. Items cause pollution.
3, sealing layer processing
That is, the grass-roots level is blocked, so that it can prevent dust or dust from becoming dense and increase the difficulty of construction. There are generally two methods. The first is for cracks, holes, and grooving, filled with gypsum products, and the other is For insulation walls, loose walls, and cracked walls, use kraft paper for solid sealing. Choose any one according to your situation.
4, thick screed treatment
Then leveling, if the surface of the wall outside the flatness is very poor, the difference> 5mm, then the proposed use of thick leveling, such construction only scrape once enough, but as thin as possible, too thick easily lead to cracking the wall later.
5, fine leveling processing
This process is carried out when the difference in flatness of the outer surface of the wall is less than 5mm. It usually needs to be scraped 2-3 times. It should be even and smooth. If it needs to be painted later, it should be sanded again with a fine sandpaper to make it smooth and flat. Brushed wall paint better.
6, brush primer
After being rubbed with thin sandpaper, the dust on the clean wall is treated, and then the paint on the underside is generally only required to be applied again. However, it needs to be 2-4 hours for it to be even and thoroughly dry, and then it can be carried out. step.
7, brush finish
Then paint the surface paint and apply it twice. After the first drying process, the next process can be carried out. It usually takes 2-4 hours. Of course, depending on the weather conditions, it takes 1-2 days to thoroughly dry the brush the second time. , The process should pay attention to dust, sun protection, waterproof.
8, acceptance
At the end of the day, the acceptance was checked. Qualified products should be flat, crack-free, pinhole free, uniform in color, and full of paint film.
Summary: The above is the new house wall decoration process that Xiao Bian brings to you today. I believe that my friends also have a certain understanding. We can learn about the decoration of the new house wall decoration. I hope this article can help you. .
These pre-engineered light profile Excavator Track Parts offer high performance and reduced weight due to an optimized geometry that handles a combination of moment and thrust loads.
And it is compact and the rating load is large because it can use a ball diameter that is bigger than the double row ball type. China Excavator Undercarriage Parts,Excavator Track Parts supplier & manufacturer, offer low price, high quality Dozer Undercarriage Parts,Excavator Swing Bearing, etc.
We are a professional manufacturer of hydraulic accessories for crawler excavators Professionally provided aftermarket customers with various brands of crawler Excavator Final Drive, Travel Motor , Travel Gearbox, Swing Device , Swing Motor ,Swing Gearbox,hydraulic pump, main Control Valve and other accessories.Strictly controlling the quality acceptance of each product Standards to ensure high-quality qualified export of each product.At the same time, we can customize the production services of the products through the drawings according to customer needs, and make every effort to make the perfect product in the mind of each customer.
If you want to know more about our products in more detail, please click on the product details to see more information about product quality, price, packaging, transportation, etc., or you can directly click on Contact Now on the page to talk to us directly. Looking forward to starting long-term business cooperation with you!
Excavator Undercarriage Parts,Excavator Track Parts,Dozer Undercarriage Parts,Excavator Bearing
Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.sdjuhengmachine.com