Latex maintenance and decontamination

First, paint and maintenance should be meticulous

According to professionals, the general paint brushing time is 3 to 4 hours, and the complete drying time is 48 hours or more.

Therefore, consumers should not use clean water to scrub directly after moving into their new home, so as not to infiltrate the paint layer with excessive moisture and form a partial "whitening" phenomenon. If it is necessary to wax the paint, it must be carried out one month after the new house is occupied, so that the moisture in the substrate can be fully evaporated. The "white marks" caused by impact on the surface of varnish can be wetted with slow-drying water first, then the surface layer can be scratched and removed with a blade tip, and then the mixture can be slowly put into a mixture with a brush, a curing agent and a paint. Start with a few light grinds with 2,500 mesh sand paper after drying.

In addition, the use of balsam can remove the glue marks formed on the surface of the paint film due to sticking. If you have problems that cannot be solved, you can also consult the paint professional.

Second, latex paint decontamination

Due to the distribution of many uniform particles on the surface of latex paint, pollutants are easily adsorbed on the surface. In order to better remove the stains, experts recommend directly using the cloth to clean Jie Ling, gently wipe along the pollution, avoid diluting with water The spirit and the hard rotating scrubbing so that the "alkali" and dirt into the surface of the paint film to dry after the formation of "water yellow blot", wipe the pollution at the site and then scrub with a damp towel again. Due to the slow drying of the surface of the construction paint film in winter, it is best to dry the window after the completion of construction and open the window for ventilation to prevent local cracking of the wall surface.

In addition, when the wall is cracked due to impact and needs to be repaired, it is best to use putty paste and latex paint to fill it. This will ensure that there is no color difference in the bottom layer of the wall after drying, and then use a latex paint brush or light coating one or two times. . If your home is using spray construction, it is best to ask professionals to repair it in order to ensure construction quality.