Paving the tile floor, if the loss is large, the owner's loss is not small. Many owners worry that the loss of ceramic tiles and floors is too large, but which is the normal loss, which is the malicious loss, what should pay attention to in the paving process of tiles and floors to make the home decoration not cost, and the heart is comfortable? First understand that the loss is inevitable during the construction process, to reduce the abnormal loss from the entire process link.
Accept normal loss
Losses are inevitable during the paving of tiles and floors. Huang Xiangling explained that because the size of the room does not match the size of the tile, it is necessary to cut the tile. If the tile is cut, it will cause loss. According to reports, in general, the overall loss rate of ceramic tiles is between 5% and 10%. “The owner must first objectively accept the concept of normal loss, because this is the inevitable construction.â€
The normal loss is caused by several reasons: the size of the house and the size of the tile detachment do not match. For example, Huang Xiangling said that if the house is 3.65 meters wide, then the 600×600 mm tile is just right, but if it is a 4 meter wide house, the remaining 20 cm of the tile will have to be cut off, causing loss. In addition, the larger the size of the tile selected, the more the loss. If it is 800×800 mm, 1200×1200 mm tiles, the cut tiles will be more worn out, and the loss will be more than 10%.
According to the national standard of ceramic tile factory, there will be color difference, thin thickness, unsquared and slid skin. Even a batch of qualified ceramic tiles will have unqualified products. The tiles purchased by the owners are more or less Some unqualified products. In the construction, cutting the tiles will also have the difference, that is, the existence of normal mistakes. According to reason, in general, the loss of 2 tiles in 100 tiles is within the normal range. These losses are normal.
Related to this, Wang Qingqiang said that the normal loss of the floor is 5%, and its loss is also related to many factors, such as the shape of the house. If there are many corners and arcs in the house, the loss is relatively large; the smaller the room, the greater the loss; Very square or the size of the house is matched with the size of the floor, the loss is relatively small; in addition, the technical proficiency of the workers will also have a certain impact on the loss, the skilled workers will probably measure the house, and calculate how to shop.
Pay attention to abnormal loss
Abnormal losses also exist in the actual process. According to experts, the abnormal loss of tiles is mainly caused by improper purchase and construction. It is understood that if the quality of the ceramic tile is poor, the possibility of damage during construction is large, and the loss is inevitably large; and the customer cannot accept that the color difference of the tile is too large, the worker will take the tile with large color, unsquared and warp when pre-laying. Come out, if it is a "low-cost treatment" product that cannot be returned, "this loss is very amazing." In the construction operation, if the pavement is accidentally broken, the tile is broken, even if the worker is not skilled, if 100 The number of pieces broken in the block tiles exceeds 2, which are considered to be malicious losses.
There are also abnormal wear and tear on the floor. Some workers will deliberately waste the floor, and some workers will cause improper wear and tear due to lack of technology.
Full monitoring to reduce losses
Experts suggest that to reduce the loss of tiles and floors, we must grasp the entire process. As far as tiles are concerned, consumers are better off purchasing qualified products and agreeing with the merchants on terms of replacement, such as whether they can be replenished, returned, replaced, claim conditions and responsibilities, etc., and know how to deal with them if they have problems; Also have to consider, ordinary 10-30 square meters of room, generally paved 600 × 600 mm tiles on the line, do not choose too large tiles, or loss more.
In order to avoid the loss of ceramic tiles, it is necessary to supervise the work. "Once you find that the workers have cut the tiles and throw them away, or if they are broken, they have to ask clearly to prevent workers from wasting."
As for the floor, the owner must first measure the area of ​​the room before buying the floor, and know how many floors to buy. If the room area is 20.5 square meters, then you need to add 5% more surplus. When buying the floor, buy a floor with a little more than 20.5 × (1 5%) = 21.525 square meters. If the floor area is overrun, ask Know why there are so many losses. If the owner is worried that the manufacturer is falsifying on the floor or “short for twoâ€, he can pay attention to the inspection when ordering. If you buy a lot of bags, how many pieces of flooring are in each package, you can’t worry about it. You can also measure each piece. Whether the floor area, length and width are standard sizes.
In addition, the owner can also supervise the work. When the paving worker saws the floor, he asks why the saw is used. Where is it used? If it is normal cutting, the worker can explain it clearly; it can also prevent the paving worker from scratching the floor; Consumers can count the floor, figure out how many pieces they have bought, how many pieces they have laid, how many pieces of waste, and how to calculate the loss rate.
Sliding Gate Metal Wheels,SlidingGate Wheel With Zerk For GarageDoor.SlidingGate Wheel With Zerk For FactoryGate,SlidingGate Wheel With Zerk For HeavyDoor
Xiamen XMillion Co.,Ltd. , https://www.xmilliondoor.com