The closet is one of the more common configurations of modern home furnishings. The closet is a storage space that is pulled out from the wall and does not basically occupy the floor. If you have very high requirements for the collection of home furnishings, then the closet is undoubtedly the best choice. The shelves inside the closet can be set in many ways according to your preference, but the following four points need to be paid attention to when installing the closet to ensure that the closet is beautiful and durable:
Ding Huan Wood Furniture Changi Home Furniture
First, the cabinet of the wall cabinet can be either a wall or a mezzanine, which not only ensures the efficient use of space, but also does not deform. But be sure to do the top and bottom level, both sides of the vertical, if there is an error, the required height difference between the left and right sides of the hole is less than 5mm, the bottom wall of the closet door can be adjusted through the debugging system to make up for errors.
Second, the installation of partitions at home cabinets generally has a drawer design, in order not to affect the use, design the position of the drawer should pay attention to: do three sliding doors should avoid the intersection of two doors; do two sliding doors should be Placed on the side of a door; when the folding door is done, the drawer should have a 17cm gap from the side wall.
Thirdly, when the track is installed as a cabinet body, it is required to reserve the size of the track. The reserved dimensions of the upper and lower tracks are 8 cm folding doors and 10 cm sliding doors.
Fourthly, the installation of closet doors is generally completed by professional personnel. The steps are: First fix the top rail, the front rail surface is in the same plane as the cabinet surface, and the upper and lower rails are laid flat in the reserved position. Then put the two doors into the track, measure the verticality of the door with a horizontal ruler or ruler, adjust the position of the upper and lower rails and fix it; check again whether the door is parallel to both sides, adjust the bottom wheel to adjust the door body , reach the border and the level of both sides; Finally, the anti-jump device is fixed, and show the quality protection book. According to this installation procedure, the user can verify whether the selected closet door brand is professional.
Links: Teach you to review the decoration drawings
Wall Construction Furniture Home Furnishing Home Decor IKEA Home Closet Door Panel Furniture Closet Doors Drawer Home Decoration Home Improvement Home
This silica fume is a sub-micron particle, which when added to Ultra High Performance Concrete (UHPC) increases its degree of compressive strength and durability. This makes UHPC particularly suitable for use in long-span bridges, blast-resistant structures (military engineering, bank vaults, etc.) and thin-walled structures, as well as in highly abrasive and corrosive environments, where it has already been used in real-world applications, such as long-span footbridges, highway and railway bridges, thin-walled silos, nuclear waste tanks, reinforcing plates for anchoring of steel cables, and protective shells of ATMs, to name a few.
silica fume for UHPC, silica ash for UHPC, silica powder for UHPC, silica fume for UHPC area
Chengdu Rongjian Engineering Materials Co.Ltd , https://www.rjsilicafume.com