1. The ball machine is energized without action, no image, the indicator light is not bright . Check if the power cable is connected incorrectly. If the connection is wrong, please connect the power cable according to the correct method.
• Check the power supply for damage: if the power supply is damaged, replace the power supply that has not been damaged.
• Inspect the fuse for damage: replace the fuse that is not damaged if it is damaged.
·Check if the power cord is in poor contact: If the contact is poor, reconnect the power cord or replace the power cord.
2. There is self-test on power, there is image, can't control · Check the address code of the dome and the baud rate setting is wrong: if there is any error, please set the matching address code and baud rate.
· Check that the protocol settings are correct: if there are errors, please set the corresponding agreement.
• Check if the RS485 control line is connected correctly: if it is wrong, please connect it in the correct way.
3. Self-test cannot be performed, there is image but accompanied by noise . Check if mechanical failure: Please correct the internal mechanical structure of the dome. If the camera is tilted, please correct it.
·The power supply may not be enough: Please replace the power supply that meets the requirements, and try to put the switching power supply near the dome.
4. The image is unstable . Replace the qualified video cable and check if the video cable is in poor contact.
·The power supply may not be enough: Please replace the power supply that meets the requirements and try to put the switching power supply near the dome.
5. Blurring
• It is possible to focus on the manual state, control the dome or call any preset position, and the dome can resume auto focus.
·The transparent cover is dirty, clean the transparent cover 6. The ball machine control is not stopped or delayed
· Check if the matching resistance of the ball machine at the farthest point is added. If the ball machine far from the control is not added, please add a matching resistor.
·The power supply may not be enough: Please replace the power supply that meets the requirements and try to put the switching power supply near the dome.
• Check the power supply for damage: if the power supply is damaged, replace the power supply that has not been damaged.
• Inspect the fuse for damage: replace the fuse that is not damaged if it is damaged.
·Check if the power cord is in poor contact: If the contact is poor, reconnect the power cord or replace the power cord.
2. There is self-test on power, there is image, can't control · Check the address code of the dome and the baud rate setting is wrong: if there is any error, please set the matching address code and baud rate.
· Check that the protocol settings are correct: if there are errors, please set the corresponding agreement.
• Check if the RS485 control line is connected correctly: if it is wrong, please connect it in the correct way.
3. Self-test cannot be performed, there is image but accompanied by noise . Check if mechanical failure: Please correct the internal mechanical structure of the dome. If the camera is tilted, please correct it.
·The power supply may not be enough: Please replace the power supply that meets the requirements, and try to put the switching power supply near the dome.
4. The image is unstable . Replace the qualified video cable and check if the video cable is in poor contact.
·The power supply may not be enough: Please replace the power supply that meets the requirements and try to put the switching power supply near the dome.
5. Blurring
• It is possible to focus on the manual state, control the dome or call any preset position, and the dome can resume auto focus.
·The transparent cover is dirty, clean the transparent cover 6. The ball machine control is not stopped or delayed
· Check if the matching resistance of the ball machine at the farthest point is added. If the ball machine far from the control is not added, please add a matching resistor.
·The power supply may not be enough: Please replace the power supply that meets the requirements and try to put the switching power supply near the dome.
Above Counter Pressed Kitchen Sink
Stainless steel sink is a best optimization for the kitchen use with best durability and addorability. Stainless steel pressed topmount single and double bowl sink can provide the kitchen user more room to finish different cleaning jobs at the same time, and make job more organized with stainless steel sink with double . And its different installation ways like undermount, top mount, drop in, and apron front can satisfy your kitchen cabinet design needs. A good stainless steel sink can make your kitchen life more easy and with pleasure!
Pressed Kitchen Sinks,Above Conter Pressed Kitchen Sink,Topmount Pressed Kitchen Sink
Guangdong Huayou Hardware Products Co.,Ltd , https://www.gdhuayouhardware.com