In recent days, the “first show†of the photovoltaic module cleaning robot prototype machine jointly developed by the Xinjiang Academy of Electric Power and Xinjiang University was successful, and the successful trial operation of the Shanshan PV power station was completed.
Since large-scale photovoltaic power stations are mostly located in desert areas, the pollution of photovoltaic modules by wind-blown sand easily leads to a reduction in power generation efficiency and seriously affects the yield of power generation. The original photovoltaic module cleaning method is not only a difficult process, but can not guarantee timely and effective cleaning. The single-machine cleaning robot jointly developed by the Institute of Electrical Engineering and Xinjiang University does not require any modification of the PV modules. It can directly attach to the photovoltaic modules to automatically walk and clean automatically, and can set different working modes. It can automatically leave the PV when the cleaning is completed. Components that do not shadow the PV module.
At present, there is no mature automatic cleaning device for photovoltaic modules in China. Compared with other similar products under development, the cleaning robot developed by the Institute of Electrical Engineering has realized the intelligent and automated process of photovoltaic module cleaning. Through this trial run, it proved the technical feasibility of the cleaning robot developed by the Institute of Electrical Engineering.
installation site
Comparison of PV modules before and after cleaning
It is reported that the Institute of Electrical Engineering will continue to improve the communication and centralized control system of cleaning robots, realize the remote control of the cleaning process, and automatically upload fault information, and finally realize the cluster control of the robot cleaning process.
Cutting parts
Precision metallographic wet cutting requires high stability and good cooling control to avoid thermal deformation. From cutting tables and clamps to cooling units and pumps, our range of accessories ensures you get high quality samples in the shortest possible time.
Easy handling of workpiece
High repeatability
High production efficiency, no thermal deformation
A variety of metallographic cutting accessories are available for different materials, workpiece sizes and sectional shapes.
Cutting Accessories ,Flat Push Fixture,Cutting Machine Fixture,Metallographic Cut Off Machin
TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com