First, the use of wooden doors:
1. For products that have not been painted before installation, the bottom oil must be completely sealed within 4 hours after unpacking.
2, whether it is before installation, due to the size measurement error, the wooden door needs to be trimmed, or the slight cracking, shrinkage, deformation, etc. in the process of use, the products that need to be trimmed must be processed or agreed by the dealer, otherwise the dealer and the factory will not bear any Warranty responsibility.
3, in order to prevent the door from hitting the wall when opening and closing the door, it is recommended to install the door suction horizontally under the back of the door.
4. When using the wooden door normally, avoid hanging heavy objects on the door or let the children hang on the door to play, so as not to shorten the service life.
5. When opening and closing the door, avoid excessive force or open angle, which will not only damage the wooden door, but also hurt the person in serious cases.
6. When opening and closing the door, gently push (or pull) the wooden door by hand, and do not hit with hard objects to prevent damage to the protective layer of the wooden door paint.
7. Do not leave the wooden door in a humid environment for a long time to avoid deformation of the wooden door.
8. The wooden door should not be exposed to strong sunlight for a long time, which will cause the paint to change color, age or peel off.
9. When the wooden door is splashed with water, wipe it with a clean cloth to avoid local expansion. Do not use too much force when wiping to avoid scratching the paint.
10. The wooden door should not be in a half-open state for a long time, so it has an influence on the force of the hinge and is easy to loose.
Second, the daily maintenance of wooden doors:
1. When removing the stain on the surface of the wooden door, use a soft cotton cloth to wipe the surface with a hard part. When the stain is too heavy, use a neutral lotion, toothpaste or furniture-specific cleaning agent to remove the stain and then dry it. Do not rinse with water.
2. Note that the rags that have been immersed in neutral reagents or have water should not be placed on the surface of the wooden door for a long time, otherwise the surface will be immersed to discolor or peel off the surface finish material.
3, pay attention to the corners of the wooden door, do not rub too much, otherwise it will cause the angular paint to fall off.
4, pay attention to the wooden door can not have strong acid or strong alkali chemical intrusion, otherwise it will easily lead to paint falling off, and even wood rot.
5. The joint surface and the lock are movable parts. When loosening occurs, it should be tightened immediately. The sound of the hinge position should be noticed in time. When the lock is opened, it is not flexible. You can add the right amount of pencil core to the keyhole. Do not fill the oil casually.
6. Due to the characteristics of shrinkage and swelling of wood, in the case of large difference in temperature and humidity, such as slight cracking or shrinkage, this is a normal natural phenomenon. With seasonal changes, this phenomenon will naturally disappear.
7, in order to maintain the bright color of the wooden door, it should be waxed regularly for maintenance.
Forstner bits, flat-bottomed to drill holes in wood materials, they can cut on the edge of a block of wood, and can cut overlapping holes; for such applications they are normally used in drill presses or lathes rather than in hand-held electric drills. Because of the flat bottom of the hole, they are useful for drilling through veneer already glued to add an inlay.
The bit includes a center point which guides it throughout the cut (and incidentally spoils the otherwise flat bottom of the hole). The cylindrical cutter around the perimeter shears the wood fibers at the edge of the bore, and also helps guide the bit into the material more precisely.
Forstner bits have radial cutting edges to plane off the material at the bottom of the hole. The bits shown in the images have two radial edges; other designs may have more. Forstner bits have no mechanism to clear chips from the hole, and therefore must be pulled out periodically.
Forstner Bits,bosch forstner bits,colt forstner bits
Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com