Wall skirting and carpet pavement common problems and solutions

>>>Links: Laying and Acceptance of Floor Tiles

Modern urban life is busy and stressful. A warm home can give everyone the most relaxing time. But how can you make your home warm and comfortable? As long as you master some tips, you can easily create a pleasant home.

Wall skirts are generally used for wall decoration in living rooms and bedrooms. It is advisable to use a height of about 900 mm. This will not only protect the wall, but also be beautiful in proportion. Wall skirts are made of wooden keel, plywood, and decorative lines. They are generally belt type and waistless type. When the wall skirt has no belt, it is necessary to design the processing method of the patchwork, and it is best to line pressure the home decoration. Stitch form. In addition, wood wall skirts often have two aspects of quality problems, once discovered, they must be dealt with promptly.

First of all, in terms of construction, if the number of keels is small and the plywood is thin and of poor quality, which can cause the board surface to be unstable, it is necessary to increase the number of wooden keels, reduce the spacing, or use thick plywood.

Secondly, in the construction, there are mainly patchwork joints with irregular seams, wood pattern distortion, dismantled joints after planing, adjustment of the board surface position, and correct installation of the flowers. The wooden wall skirts should be constructed after the roof and wall base are treated and completed before the completion of the project. Among them, the installation of wooden keels and panels in the three-bedroom and two-bay rooms takes about 20 workers. The complexity of the wall skirts will affect the construction period. According to the difference in the use of paint and construction methods, paint construction will be different, usually takes 4 days, can be carried out with other wood surface paint at the same time.

The common quality defects of carpet pavement include drumming, wrinkling, inconsistent color and carpet looseness. Rugs, such as drums, wrinkles, in addition to the carpet before the paving is not flattened, the main reason is that when the paving the elasticity of the bar and the barbed plate barbed the individual did not catch the result. When the carpet is open, if there is a bulging phenomenon, the carpet should be rolled up and spread flat. Or when the pavement is loaded, the force is evenly distributed. Immediately after the flat leveling, the barbed plate is placed and beaten with a flat spade to ensure that all the barbs can grasp the carpet. If the color is inconsistent, in addition to the poor quality of the material, the surface of the base layer may be wetted or oozing to make the carpet discolor after absorbing water, and the sun exposure may lighten the surface of the carpet. Therefore, when buying, pay attention to the selection of good quality, consistent color carpet. In addition, if the barb on the barbed plate cannot be fixed, it will cause the carpet to loosen, so the decoration company is required to configure the barbed plate so as to ensure that the barbs fully grasp the carpet.

Floor acceptance wall construction paint Home decoration Home decoration design Home decoration Living room wall color decoration Find decoration company How do you Decorate the living room Bedroom decoration Home

Microscope Slides

The East-West glass slide is a glass slide or quartz slide that is used to place a glass slide or quartz slide when it is observed under a microscope. During production, a cell or a sample containing a certain tissue is randomly placed on the slide glass, and a cover slip is placed on it for observation a similar material that produces a phase difference.

microscope slide

microscope slide,slide microscope,slides for microscope,microscope glass slides,slides for a microscope

Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yypcrtube.com

Posted on