According to the scope of use and pumping efficiency can be divided into three types of vacuum pumps: (1) the general pump, the pressure can reach 1.333 ~ 100kPa (10 ~ 760mmHg) for the "rough" vacuum. (2) pump, pressure up to 0.133 ~ 133.3Pa (0.001 ~ 1mmHg) for the "second highest" vacuum. (3) diffusion pump, pressure up to 0.133Pa the following, (10-3mmHg) to "high" vacuum. Pumps and pumps are commonly used in organic chemistry labs. There are two types of pumps, one is water pump and the other is water pump. If the pump is well constructed and the pressure is high, the pumping efficiency can reach 1067 ~ 3333Pa (8 ~ 25mmHg). The lowest pressure the pump can draw is theoretically equivalent to the water vapor pressure at the time of the water temperature. For example, the water vapor pressure is 3192, 2394, 1197 Pa (8-25 mmHg) when the water temperature is 25 ° C, 20 ° C and 10 ° C, respectively. Pumping with water pump, safety pump should be installed in front of the pump to prevent the pressure drop, the water flow suction; stop pumping before, you should deflate, and then turn off the pump. To lower the pressure, it is necessary to use the pump, a good pump can be pumped 133.3Pa (1mmHg) below. The quality of the pump depends on its mechanical structure and the quality of the oil, which must be protected when using the pump. If the distillation of volatile organic solvents, the organic solvent will be the result of oil absorption increased vapor pressure, thereby reducing the pumping efficiency, if it is acid gas, it will corrode the pump, if it is steam will make the oil into milk Turbidity and vacuum pump. Therefore, when using the pump must pay attention to the following points: Between the distillation system and the pump must be equipped with absorption devices. Before distillation, the steam of the organic solvent in the system must be thoroughly drained by a water pump. If you can pump the air, then try to use the pump, such as distillation of volatile substances can be reduced by pumping first pump, and then switch to the pump. Decompression system must be kept airtight, all the rubber plug size and hole to be appropriate, rubber hose to use vacuum hose. Wear glass coated with vacuum grease.
Red Smd Led
Red SMD LED manufacturer from China.
Those Red SMD LED was born for excellent lighting effects.
Need some really bright LEDs? Contact us now!
Red SMD LED is easy to use in decorated your home or garden. It's widely use in Grow Light Source, lighting, Led lights decoration, Led lighting and
other fields as well.
In 18 years, we supply the red SMD LED with High consistency, high brightness, low light attenuation has been recognized by our customers.
1, Red SMD LED has a lots of size like: 2835 Red SMD LED, 3020 red SMD
LED, 3528 red SMD
LED, 3014 red SMD LED, 3030 red SMD
LED, 3535 red SMD
LED, 5730 red SMD
LED, 5050 red SMD
LED and so on.
2, Variety of color available: deep red SMD LED, red SMD LED, red grow light SMD LED, pale red SMD LED. For instance: 625nm red smd led, 635nm red smd led, 645nm red smd led, 650nm red smd led, 660nm LED, ect.
3, Different brightness: common brightness red SMD LED, High light red SMD LED, Super bright red SMD LED, Ultra bright red SMD LED.
4, Variety of power available: We can supply red SMD
LED with 0.06W red LED, 0.1W red LED, 0.2W red LED, 0.5W red
LED, 1W red LED, 3W red LED. We can also supply customized single chip
red LED, double chips red LED, three chips red LED or multi chip red LED for you.
We
will do the High temperature resistance testing and 10 hours ageing
treatment before the product out off the factory, which can ensure the
stability of each product. Our LED products have 5 year warranty. Please
believe that we are the best supplier for your light-emitting diode.
welcome to visit our factory.
Red Smd Led,2835 Red Smd Led,5050 Red Smd Led,3528 Red Smd Led,660nm Red smd led,5730 Red SMD LED
Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK) , https://www.bestsmd.com