Many a problem often encountered when the number of users in the use of Force Gauge, Digital Force that appear meter measurement inaccurate, most users do not understand why, following on from the Shanghai Heng cast several significant push Rally Ji Xiaobian to explain why the digital display of force gauges is not accurate.
In fact, there are two main reasons why the digital force gauge measurement is not accurate:
First, there is no correct use of digital display force gauges:
1: The greatest harm caused by the digital push-pull force meter is that during the test, it must not exceed its measurement range, and the load test outside the push or pull direction cannot be performed.
2: When the test rod is not connected to any test head, the load under test cannot be directly applied to the test rod end.
3: Please do not use test heads that are damaged or bent. This will inevitably cause errors.
4: Please do not use the digital push-pull force meter to measure the load that exceeds the maximum test load. Otherwise, the elastic force of the load detection mechanism will gradually deteriorate, resulting in the detected load value cannot reach the required accuracy level.
5: In the use of digital display push-pull force timer should pay attention to, before use, first check the battery voltage is normal, if under voltage, please charge in time, otherwise the measurement will appear deviation.
Second, there is no regular logarithmic force gauge for maintenance and repair:
1: Since the digital push-pull force gauge is powered by electrical energy, it should be periodically charged if it is not used for a long period of time.
2: Each time you use a digital push-pull force meter, put it in the box and put it in room temperature. Do not expose it to sunlight.
3: If the place where the digital force gauge is stored is moist and not ventilated, it will cause the instrument to be rusted and damaged.
If you think that the above two methods can not solve the problem of digital display of push-pull force meter, you can call us back and we can help you solve it.
This article by the digital push force meter: http://. . Com/zhyq-ParentList-266713/ Friendship.
related articles:
Digital and pointer push-pull force meter which is a good way to find digital push-pull gauge failure
Digital push-pull gauge crash solution Digital push-pull gauge operating environment and proper use
Digital push-pull gauge picture
Welcome to do business with us
Size: 1/2''~6''
Class Rating: 3000~6000
Facing: RF(raised face);FF(flat face);RTJ(ring type joint);RJ(ring joint face)
TG(tongue and groove face);MFM(male and female face)
Manufacturing process: Push, Press, Forge, Cast, etc.
Material:
Carbon steel:
ASTM A105;
ASTM A266 GR.1,GR.2,GR.3,GR.4
Stainless steel:
304/SUS304/UNS S30400/1.4301
304L/UNS S30403/1.4306;
304H/UNS S30409/1.4948;
309S/UNS S30908/1.4833
309H/UNS S30909;
310S/UNS S31008/1.4845;
310H/UNS S31009;
316/UNS S31600/1.4401;
316Ti/UNS S31635/1.4571;
316H/UNS S31609/1.4436;
316L/UNS S31603/1.4404;
316LN/UNS S31653;
317/UNS S31700;
317L/UNS S31703/1.4438;
321/UNS S32100/1.4541;
321H/UNS S32109;
347/UNS S34700/1.4550;
347H/UNS S34709/1.4912;
348/UNS S34800;
Alloy steel:
ASTM A694 F42/F46/F48/F50/F52/F56/F60/F65/F70;
ASTM A182 F5a/F5/F9/F11/F12/F22/F91;
ASTM A350 LF1/LF2/LF3;
Duplex steel:
ASTM A182 F51/S31803/1.4462;
ASTM A182 F53/S2507/S32750/1.4401;
ASTM A182 F55/S32760/1.4501/Zeron 100;
2205/F60/S32205;
ASTM A182 F44/S31254/254SMO/1.4547;
17-4PH/S17400/1.4542/SUS630/AISI630;
F904L/NO8904/1.4539;
725LN/310MoLN/S31050/1.4466
253MA/S30815/1.4835;
Nickel alloy steel:
Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;
Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;
Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;
Alloy K-500/Monel K-500/NO5500/2.475;
Alloy 600/Inconel 600/NO6600/NS333/2.4816;
Alloy 601/Inconel 601/NO6001/2.4851;
Alloy 625/Inconel 625/NO6625/NS336/2.4856;
Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;
Alloy 800/Incoloy 800/NO8800/1.4876;
Alloy 800H/Incoloy 800H/NO8810/1.4958;
Alloy 800HT/Incoloy 800HT/NO8811/1.4959;
Alloy 825/Incoloy 825/NO8825/2.4858/NS142;
Alloy 925/Incoloy 925/NO9925;
Hastelloy C/Alloy C/NO6003/2.4869/NS333;
Alloy C-276/Hastelloy C-276/N10276/2.4819;
Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;
Alloy C-22/Hastelloy C-22/NO6022/2.4602;
Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;
Alloy B/Hastelloy B/NS321/N10001;
Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;
Alloy B-3/Hastelloy B-3/N10675/2.4600;
Alloy X/Hastelloy X/NO6002/2.4665;
Alloy G-30/Hastelloy G-30/NO6030/2.4603;
Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;
Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;
Alloy 31/NO8031/1.4562;
Alloy 901/NO9901/1.4898;
Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;
Inconel 783/UNS R30783;
NAS 254NM/NO8367;
Monel 30C
Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952
Nimonic 263/NO7263
Nimonic 90/UNS NO7090;
Incoloy 907/GH907;
Nitronic 60/Alloy 218/UNS S21800
SALES@GHSAILINGPIPE.COM
SALES@GHSAILINGPIPE.COM
The supporting tube stand is also called the branch pipe seat, saddle seat and saddle type pipe joint. It is mainly used for reinforcing pipe fittings of branch pipe connection, instead of using different diameter three - way, reinforcing plate and strengthening pipe section. It has the advantages of safety, reliability, lower cost, simple construction, improvement of medium channel, series standardization, convenient design and so on, especially in high pressure, high temperature, large diameter and thick wall pipe. It is widely used instead of the traditional branch connection method.
The main body is made of high quality forgings, and the material is the same as that of pipeline materials, such as carbon steel, alloy steel, stainless steel and so on. Both the pipe and the head are welded, and the joint of the branch pipe and other pipes, such as the short pipe, the plug and so on, the connection of the instrument and valve, has many types of welding, socket welding, thread and so on.
Criteria: MSS SP 97, GB/T 19326, pressure: 3000#, 6000#
Branch Outlet Fittings,Astm A694 F52 Weldolet,Hydraulic Branch Outlet Fittings,Socket Welding Fitting
HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com