According to the national standard of the People's Republic of China GB-17395-1988 1 Allowable outer diameter deviation Table 1 Standardized outer diameter allowable deviation Deviation level Standardized outer diameter allowable deviation D1 ±1.5%, minimum ±0.75 mm
D2 ±1.0%. Minimum ±0.50 mm
D3 ±0.75%. Minimum ±0.30 mm
D4 ± 0.50%. Minimum ±0.10 mm
Table 5 Non-standardized outer diameter allowable deviation Deviation level Non-standardized outer diameter allowable deviation, %
ND1 +1.25 -1.50
ND2 ±1.25
ND3 +1.25 -1.O
ND4 ±0.8
2. The absolute tolerances of the outer diameter allowable deviations of special-purpose steel tubes and cold-rolled (pull-out) steel tubes can be used. 2.1 Wall thickness tolerances Wall thickness tolerances are divided into standard and non-standard. The standardized wall thickness tolerances should be prioritized (see Table 6). Table 6 Wall thickness tolerance deviation level Wall thickness tolerance
S/D
0.1< S/DO. 05 0.025 S/D ≤ 0.025
S1 ±15%, minimum ±0.6 mm
S2 A ±12.5%, minimum ±0.4 mm
B + positive deviation depends on weight requirement -12.5
S3 A ±10%, minimum ±0.2mm
B ±10% ±12.5% ​​±15%
Minimum ±0.4mm
C + positive deviation depends on weight requirement -10%
S4 A ±7.5%, minimum ±0.15 mm
B 7.5% ± 10% ± 12.5% ​​± 15%
Minimum ± 0.2 mm
S5 ±5%, minimum ±0.10 mm
Note: S is the nominal wall thickness of the pipe and D is the nominal outside diameter of the pipe.
Suzhou Newstar Hardware Co.,Ltd is a professional Hand Tool bag manufacture located in Jiangsu Province China, including tool duffel bag, mechanic tools bag, Tool Bag set, etc. We could offer customers different kinds of tools bags with customized needs, such as material, size, type, pockets, handles, small inner pockets, name card, logo, etc. And also we are specialized in tools which could be put in tool bag, different combinations of Hand Tools, power tools and Garden Tools.
Hand Tool Bag,Tool Duffel Bag,Mechanic Tool Bag,Tool Bag Set
SUZHOU NEWSTAR HARDWARE CO.,LTD. , https://www.sjnewstarhardware.com