When the decoration is completed, the housing layout may not be what we want, and the main body needs to be demolished. The decoration and demolition is to make the use of the house space better, and at the same time to create the decoration effect that the owner wants. However, you must not dismantle it. If you make a mistake, it is not a house decoration. It is very likely that you will build a house. Therefore, here, the decoration home network Xiaobian still has to smash the four "sensitive areas" of the renovation and renovation.
Renovation and renovation of "sensitive areas": load-bearing walls
After the renovation and demolition personnel entered the scene, they were to demolish the wall and bury the pipeline. In the process of demolishing the wall, many decoration owners often like to remove the load-bearing wall privately for the overall decoration effect of the house. This is a very undesirable practice.
In the general brick-concrete structure, all prefabricated slab walls are load-bearing walls, and they cannot be removed or opened. Brick walls over 24 cm are also load-bearing walls. Do not move the load-bearing wall during the decoration. It is not good to have a large area on the top.
Tip: Demolition of the load-bearing wall, opening the door on the load-bearing wall, opening the window, and thinning the load-bearing wall not only directly damages and weakens the bearing capacity of the load-bearing wall, but also destroys the integrity and shock resistance of the house. It may also cause the loosening of the adjacent wall, the strength of the wall, the bearing capacity, and the cracking of the wall and floor of the upper and lower floors, resulting in structural damage. Such walls and slabs can easily collapse or break in the event of an earthquake.
Renovation and renovation of "sensitive area" 2: gas pipeline
Residents or decoration personnel can easily disassemble gas pipelines and enclose gas valves, which can easily cause gas leakage. The gas pipeline is encapsulated, the gas leakage is not easily detected, and the leaking gas is not easily diffused and concentrated locally. Before use, there is no professional safety test, and an open fire will inevitably cause an explosion.
Note: Gas facilities have strict technical specifications and safety requirements in design and installation, and must be constructed by professionals. If the residents do need to change the gas pipeline when decorating the living room, they should apply to the gas supply unit, and the gas supply unit will conduct on-site survey and make comments. If the change can be made, the gas supply unit will issue a construction plan and be operated by professionals. Should have professional qualifications.
Renovation and renovation of "sensitive areas" three: heating pipes
The heating pipes were demolished during the renovation, and the conditions of the water pipes were also common. Heating pipes and water pipes have a common feature, that is, these pipes form a whole system within a certain range, and each household cannot be completely independent. Therefore, when renovating such pipelines, care should be taken that all modifications should be based on the premise that the entire system is not affected.
Tip: There are many drawbacks in the process of dismantling and changing the heating. After the original designed heating is changed, the pressure will change. After the heat balance is broken, the heating will be out of order, causing the heat in the building to be very hot and cold. The modified heating is difficult to guarantee that it will not leak.
Renovation and renovation of "sensitive areas" four: balcony "weight wall"
There is a window and a window on the wall between the room and the balcony. These doors and windows can be removed, but the wall below the window cannot be removed. Because the wall is a "weight wall", it plays like a scale. effect. Many owners believe that the role of the weight wall is not great, blocking the sunlight from entering the room and affecting the lighting of the room. Therefore, it is often considered to remove the weight wall and form a large cornice at the balcony.
Tip: Removing the weight wall will cause the load capacity of the balcony to drop, causing the balcony to fall. Demolition of the counterweight wall will change the original force of the building structure, and may also result in reduced load bearing capacity of the balcony and even the risk of collapse. Some old-fashioned balconies are pick-up structures. Once the weight wall is removed, the wall structure of the “pressing†balcony is destroyed, which weakens the load-bearing capacity of the balcony.
The above is a detailed answer to the renovation and renovation, I do not know if you are satisfied with the introduction of the decoration home network Xiaobian. If you want to know more about the exciting content, please continue to pay attention to our decoration encyclopedia!
More related wonderful reading:
What is structural demolition? What is the relationship between structural demolition and restructuring?
What should I pay attention to when dismantling the wall? What can't move the wall?
Home decoration, do not arbitrarily dismantle the wall, non-bearing wall, demolition
Main body dismantling process main body dismantling precautions
Buffing Wheel is made of finely cotton cloth by special technology and is the precision polishing tools of metal and non-metallic workpieces,It is made of mutillayers 100% cotton cloth sewn surround by the center,with a leather lip attached around the inner hole. High quality material, exquisite workmanship, long service life.Specially used for polishing jewelry, ornaments, or precise products.
The layers of cloth edge with pile processing,suitable for metal, jewelry hardware,stainless steel, aluminum products, wood, plastic, ceramic, glass and watch industry grinding and polishing.
Working with polishing wax polishing effect is better.
Treated Buffing Wheels have a special chemical added to the cotton which gives them more aggressive cutting action allowing them to work faster than standard cotton spiral sewn buffing wheels. The chemical treatment also gives these buffs a longer lifespan.
Treated buffing wheels can be used in place of Cotton Spiral Sewn buffing wheels for cutting and coarse buffing.
Features:
-- Suitable for Metal, jewelry, metal, stainless steel, aluminum, wood, plastic.
-- Surface of the ceramic, glass and watches industry grinding and polishing.
-- Use with polishing wax polishing better.
-- Can be stacked onto tapered spindles for required thickness.
We distributes and wholesales various brands of Bonded Abrasives , Abrasive Sanding Disc, Cutting Wheels , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.
Cotton Buffing Wheels,Buffing Wheels,Polishing Wheel,Cut Off Wheels
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jiadingabrasive.com