The precipitator is a commonly used facility in boilers and industrial production. The cost, operation and maintenance costs, service life, and ease of operation and management of the precipitator are also important factors in considering its performance. How to install the dust collector?
Dust collector installation procedure
1. Before installing the dust collector, check whether all accessories are complete, whether the host is damaged or not, and whether the connection of the parts is firm, etc. If there is any problem to be solved before installation.
2. Equipment needs to be placed on a flat, firm foundation.
3. The equipment should be reliably grounded (planar).
4. The input end of the electromagnetic pulse Valve is inserted into the metal tube of the gas reservoir. The output end of the electromagnetic pulse valve is inserted into the spray tube of the dust remover. The rubber sealing ring and the fixing nut are provided on both ends of the valve. The electromagnetic pulse valve can be reliably fixed and sealed.
5. The working principle of the electrical control system and the precautions for installation and adjustment refer to the instruction manual of the electrical control system.
6. When the water separation filter pressure reducing valve is installed, the direction of the arrow indicated by the water separation filter pressure reducing valve must be consistent with the flow direction of the compressed air, and the outlet pressure of the pressure reducing valve should be adjusted to 0.4 to 0.6 MPa.
7. When the dust collector is installed outdoors, the air filter decompression two-part, electromagnetic pulse valve and pulse jet control instrument need to be installed with a rain canopy or cover.
8. Before the equipment is put into use, check whether the fan on the equipment is operating normally, whether there is abnormal noise or unfavorable conditions. Otherwise, it shall be shut down for repair. During commissioning, the fan must be turned on first to observe the steering of the fan and ensure that the fan can be operated normally and the steering can be put into use only when the steering is correct.
9. Rotate the pulse knob. The pulse jet controller issues an order and turns on the electromagnetic pulse valve in order to observe whether the cleaning action is correct.
The dust collector is divided into the following five categories according to its function principle
(1) Mechanical dust collectors include gravity dust collectors, inertial dust collectors, and centrifugal dust collectors.
(2) Washing dust collectors include water bath dust collectors, bubble dust collectors, venturi tube dust collectors, and water film dust collectors.
(3) Filter dust collectors include bag dust collectors and particle layer dust collectors.
(4) Electrostatic precipitators; including tube-type electrostatic precipitators, plate-type electrostatic precipitators, and wet electrostatic precipitators.
(5) If the industrial gas is directly discharged into the atmosphere, it will cause great pollution and harm to the environment, resulting in bad weather such as acid rain and acid mist. The dust collector has been widely used in China and new types of dust collectors such as electric dust collectors are emerging. The dust collectors of the fiber dust collector and the composite dust remover all show that the dust collector has great development prospects.
Precipitator use matters needing attention
When the dust collector is in use, there are many places that need attention: to prevent the dust removal efficiency from decreasing: During use, it is necessary to prevent the gas from cooling in the bag to below the dew point, especially when the bag filter is used for negative pressure. Because the shell often has air leakage, so that the bag room gas temperature is lower than the dew point, the filter belt will be damp, so that the dust is not loose but sticky to the filter belt, the fabric hole is blocked, resulting in cleaning Failure, so that the pressure drop of the dust collector is too large, can not continue to run, and some produce a paste bag can not dust.
Summary: The above is the content of the dust collector installation steps that Xiaobian introduced for everyone. Did the small partners know? I hope you can effectively help everyone, more information, please pay attention to this site.
Smart vacuum cleaner Charger Vacuum cleaner Water filter Vacuum cleaner Handheld vacuum cleaner Vacuum bag vacuum cleaner
Ball Valves,Flange Type Ball Valve,Flanged Ball Valve,Platform Flanged Ball Valve
ZHITONG PIPE VALVE TECHNOLOGY CO.,LTD , https://www.ztpipevalve.com