Main points of fertilization techniques in wheat in the middle and late stages

In the middle and late stages of wheat growth, the amount of fertilizer needed is large, and soil fertility is often difficult to meet. Especially in the late growth stage of wheat, the roots are senescent, the absorption function is weakened, and the fertilizer is less absorbed from the soil. If the leaf fertilization is not carried out in time, it will cause premature aging and affect the yield. . The foliar fertilization method is simple and the fertilizer efficiency is rapid, which is an important measure to ensure high yield and quality of wheat.
Spraying time: Foliar fertilization in the middle and late stages of wheat is easy to choose after no windy cloudy days or sunny days before 10 am, after 4 pm. The temperature is high at noon and should not be sprayed. .
Fertilizer concentration: It can be selected according to the growth condition of wheat. The suitable concentration is urea 1%, and potassium dihydrogen phosphate is 0.1%. Reasonable spraying: liquid surface fertilizer mixing spray, not only saves labor and time, but also improves fertilizer efficiency. Such as nitrogen, phosphorus and fertilizer mixed spray; nitrogen, phosphorus, potassium and trace element fertilizer mixed spray; fertilizer and regulator or in line with nutrient mixing spray, etc., its fertilizer efficiency and yield increase are better than single spray. After mixing the mixture, it should be sprayed in time to prevent loss of fertilizer efficiency. In the fertilizer solution, the corresponding pesticides can be added according to the occurrence of pests and diseases, and the fertilizers and drugs can be mixed. For example, in the prevention and control of wheat spikes, 60 kg of mixed liquid per acre can be used (1% urea, + potassium dihydrogen phosphate 0.1). The method of %+ Tianfengsu 16 ml + Dimethoate 120 ml) can achieve the purpose of both fertilization and pest control.

Huaxian Agricultural Technology Promotion Center Lu Shuguang
【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

Adhesive Tape Sealant Strip

The purpose of door and window sealing strip is divided into three categories: glass sealing strip (rubber strip), door leaf and door cover sealing strip and wool strip. The glass sealing strip is used for the sealing between glass and leaf and frame, the door leaf and door cover sealing strip is mainly used for the sealing between door panel and door frame, and the wool strip is mainly used for the sealing between frame and leaf. In the production and installation of plastic steel doors and windows, broken bridge aluminum doors and windows and wooden doors, sealing strip is an essential accessory.

The sealant strip plays an important role in waterproof, sealing and energy saving in plastic steel doors and windows, bridge broken aluminum doors and windows and wooden doors and windows, with sound insulation, dust prevention, antifreeze and warmth preservation. It must have strong tensile strength, good elasticity, and good temperature resistance and aging resistance. In order to ensure the fastening of the rubber strip and the profile, the section structure size of the rubber strip must match the profile of plastic steel doors and windows. Sealant strips are generally used for flat doors and windows, suspended windows and folding doors and windows. The main functions are dust prevention, insect prevention, waterproof, sound insulation, sealing, etc.

The installation position of the wool top is generally on the sliding window (door) leaf, the circumference of the frame leaf or the sealing bridge (wind block) to enhance the sealing between the frame and the leaf. Top specification is an important factor affecting the and watertight performance of push-pull doors and windows, and it is also an important factor affecting the switching force of doors and windows. If the wool top specification is too large or the vertical wool is too high, it will not only make assembly difficult, but also increase the moving resistance of doors and windows, especially the initial resistance when opening and the final positioning resistance when closing. If the specification is too small, or the height of the vertical top is not enough, it is easy to fall out of the groove, which greatly reduces the sealing performance of doors and windows.

There are two kinds of tops: silicified and non silicified. The top after silicified treatment has better effect in use. The appearance of the top with qualified quality is that the surface is straight, the bottom plate and vertical hair are smooth and free of bending, and there are no pits on the bottom plate, which meets the requirements of 0.2mm.

Adhesive Tape Sealant Strip,Tape Sealant Strip,Adhesive Tape For Sliding,Aluminium Sliding Adhesive Tape

GuangDong XinCheng Material CO.,LTD , https://www.xin-alu.com

Posted on