Bathroom decoration plays an important role in home decoration. Waterproof and comfortable space layout have a great impact on the daily mood of the family, and even affect the physical and mental health. Therefore, Xiaobian has compiled some precautions for the renovation of the bathroom, and shared it with the friends. I hope that the friends can have a good start every day!
1. The bathroom floor is first leveled
If you want to replace the floor tiles of the bathroom, after you have cut the original floor tiles, you must first level the floor with cement mortar and then do waterproofing. This prevents leakage of the waterproof coating due to uneven thickness.
2. The seam should be painted in place
The seam between the bathroom wall and the joint between the upper and lower water pipes and the ground is the most prone to problems. During the construction, workers must be urged to handle these corners and apply the waterproof coating in place.
3. Wall treatment is also very important
In the general bathroom waterproofing treatment, the wall surface should also be made of waterproof coating of about 30 cm high to prevent water from oozing through the wall. However, if the wall of the bathroom is a non-load-bearing light-weight wall, the entire wall should be covered with waterproof coating.
4. Waterproof experiment must be done
After the construction of the bathroom is completed, all the water in the bathroom will be blocked, and a 25 cm high "can" will be built at the door, and then 20 cm of water will be poured into the bathroom. After 24 hours, check the surrounding walls and the ground for leaks. This 24-hour waterproof test is the key to ensuring the quality of the bathroom waterproofing project. It must be done.
Led Par Light,Par16 Led Bulb,Par56 Led Bulb,Par 46 Led Bulb
Big Dipper Laser Science And Technology Co., Ltd , https://www.bigdipper-laser.com