
In Hunan, Yuchao Taoban was in a semi-production state. Due to recent unbalanced power coal, lean rain, thermal power unit failure, and out-purchased electricity reduction, Hunan experienced a serious shortage of electricity. The reporter learned from a variety of ways that the ceramic enterprises in Hunan Hengyang, Yueyang New Wall Industrial Park and Linxiang Industrial Park began to comprehensively restrict electricity from May 1. So far the ceramic enterprises are in semi-production state.
In order to be confirmed, on May 4th, they entered the production workshops of two ceramic enterprises in the New Wall Industrial Park. It has been observed that one company has shut down two sets of polishing lines while the other shuts down two large lines, leaving only two small lines. Enterprise production line workers are also in a half rest state. A person in charge of the business department said: “Without electricity, employees only have a holiday, but they are on standby at any time to prevent normal production after the call. They continue to pay for their employees.†According to reports from a number of plant managers, power cuts are from 5 On the 1st of the month, the current semi-production status has been maintained for 4 days. Linxiang told a person in charge of the company that the current production status of the Linxiang Tao Enterprise opened one for the three production lines; Hengyang Henglifeng, a brand owner also said that due to limited power, the plant is currently in semi-production state.
Why did it cause such a serious shortage of electricity? The reporter learned from three sources that there were three reasons. The main sources of electricity in Hunan are hydropower and thermal power generation, and hydropower uses 53% of the electricity. One reason is that since the beginning of 2011, there has been relatively little dry weather in Hunan, and in April the water level in the Xiangjiang River has reached a new low level. Insufficient hydropower. The second reason is that the failure of an electromechanical group leads to a reduction in the total power supply. The third reason is the lack of coal, thermal power plants do not have enough coal power to fill the hydropower gap.
On the afternoon of May 5th, the New Wall Building Materials Industrial Park called the person in charge of the company to hold an emergency meeting. At the meeting, Zhang Zhongxin, the director of the industrial park, explained that in the current situation of electricity use in Yueyang County, he said: “Strictly speaking, the electricity restriction should be started from April 15th, but it has not been implemented. The performance of electricity shortage until April 30th was compared. After the serious incident, it began to vigorously limit the power supply on May 1. The county's normal electricity consumption is about 118,000 kVA, and the dispatch room shows that the county's usage is only 48,000 kVA before 7:00 this morning. The amount of electricity consumed by enterprises accounts for 1/3 of the total electricity consumption, and is about 2000 kVA per plant.After receiving the notification, the county's electricity consumption will be limited to 32 million kVA, and the park's enterprises will be limited to 8000 kVA. “Director Zhang expressed very sad about the current situation of power curtailment. He said:†Not only is the park's pottery enterprises limiting power, Hualun Pharmaceutical Factory has been opened, and the electricity consumption of residents in the county is limited to 4 hours a day. The situation is very serious. â€
The company also analyzes and summarizes its own impact on the operation of the company during the current power cut. If the time for power cuts is short, companies can take measures to stop the kiln to reduce the losses caused by direct stoppage of the kiln. If the power cuts take a long time, enterprises can directly suspend production and leave to reduce the cost of heat insulation to the furnace. The losses caused by this power limitation are mainly reflected in the damage to the equipment caused by the brakes, the employee’s stoppage of pay, the customer’s breach of contract, and the loss of customers.
At present, the biggest problem in the production areas is the uncertainty of power supply. The relevant units from the province to the city to the prefecture-level cities have not given the time limit for power curtailment. Enterprises have no way to respond. Corresponding countermeasures are also made for this park. First, each company makes statistics on the minimum electricity consumption for normal production of its own company in the form of a detailed statement. Second, each company’s actual demand leads to this power cut. The details of direct and indirect losses are detailed. The above two tasks provide the basis for power supply standards and post-processing.
After Jiangxi's most severe “limited power†ceramics company’s production capacity plummeted or its brewing price increases successfully overcame “frozen disasters†and “financial crisisâ€, the Jiangxi Jiantao Production Area headed by Gao'an once again ushered in the “big exam†- Experience "the most severe power shortage in history." The reason why the Jiangxi media is called "the most severe in history", first, this year, "power limit" years earlier, the second is "power limit" greater than in previous years, and third, the duration may be relatively long. The Jiangxi architectural ceramics industry, which has been tempered by risks for many times, has already entered the normal development track. How will it respond before this dangerous situation?
Lanejoy is all kinds of spring Manufacturer at china 10 years, we had made compression spring, Wire Spring, Torsion Spring, Tension Spring, recoil spring and so on.
we also can do for OEM OR ODM
compression spring,wire spring,torsion spring,tension spring,recoil spring
Shenzhen Lanejoy Technology Co.,LTD , https://www.szstainlesssteelwiremesh.com