Inventory December 2010 hardware industry standard "big handwriting"

Recalling that in December 2010, the standardization work of the hardware products industry was frequently generous. The introduction of the 2010 National Standard System Amendment Plan and the series of activities carried out by the China Hardware Products Association and the National Hardware Standardization Technical Committee around the standards have laid down such plans for the upcoming New Year and the Twelfth Five-Year Plan to promote the process of industry standardization. , will become the focus of the future hardware industry.

Twenty-two hardware standards were included in the national standard system revision plan. On December 2, the National Standardization Management Committee issued the 2010 National Standards Revision Plan. There are a total of 2,385 amendments to this batch of plans, of which 1195 are formulated, 1101 are revised, and 89 are national standard samples.

The national standard system revision project involves 22 items including hardware products including Terms and Class of Kitchen Hardware and Accessories, and Home Kitchen Equipment.

The National Hardware Standardization Technical Committee and the National Standardization Technical Committee for Metal Catering and Cooking Appliances will rapidly begin various preparations, including the establishment of a drafting group, relevant research work, the drafting of relevant standards, the organization of members of the Standardization Committee and members of the drafting group. Training, etc., strive to complete the standard plan work on time and quality.

"Home Kitchen Equipment" National Standard Revision Conference held in Nanjing On December 7th, the first working meeting of the National Standard Revision Working Group of GB/T18884-2002 "Home Kitchen Equipment" was held in Nanjing. Liu Yunfeng, deputy secretary-general of China National Hardware Association, attended and chaired the meeting.

Liu Gang, executive deputy director of the National Standardization Center for Daily Use Hardware, said that the current National Standard for Domestic Kitchen Equipment (GB/T18884-2002) was initiated in 2000 when the need for revision of the standard was established. There is a huge difference between the development status and the product level. In the revision of this standard, the drafting group should implement the principles of scientificity, advanced nature, economy, operability, forward-lookingness, and coordination. With the revision of this standard, the original reference part should be fully cleared.

When talking about the requirements for revision of the standard, Liu Runfeng emphasized: “The National Kitchen Appliances Standard involves multiple products, which is rare in the standard system revision work. Each member of the drafting group should keep in mind the basic principles of standard setting. In the new standard, we must pay special attention to health, safety, and environmental protection.At present, there is a big difference in the market of household kitchen equipment. We hope to establish a more reasonable threshold for the industry through this revision of standards, and to establish a correct orientation for the development of the industry. Standards should represent the development direction of the industry, and we must consider protecting the interests of consumers."

After determining the necessity and basic principles for the revision of this standard, the participants separately discussed the terminology, general technical requirements, test methods and inspection rules, design and installation in GB/T18884-2002 "Home Kitchen Equipment" national standards. Make preliminary suggestions for modification. The members of the drafting team not only included cabinet manufacturers, but also participated in the participation of hardware accessories manufacturers and electrical appliance suppliers, which provided a very solid foundation for the revision of standards. The members of the drafting group put forward a lot of positive revision opinions on the standards from the perspective of the industry in light of the actual situation. It is understood that after this meeting, the drafting group will work on the preparation of new standards and complete the first draft in mid-January 2011.

The hardware standardization training work was officially launched on December 3. The first standardization training course of the National Hardware Standardization Technical Committee was held in Beijing. The commencement of this training class marked the official opening of the national hardware standardization training work. The training was highly valued and supported by the China Hardware Products Association, the National Hardware Standardization Technical Committee, and various hardware subcommittees. Shi Lanlan, Deputy Director of the China Hardware Products Association, and Deputy Secretary-General Liu Runfeng attended the training and participated in the training together with 31 members of the zipper sub-committee.

Shi Lanlan said at the opening ceremony: "The purpose of holding a training course is to improve the policy and business level of the committee members through learning and training. Its purpose is to promote standardization work in the industry and strengthen standards awareness. The actual situation lays a good foundation for the standard revision work."

The training class invited Wang Xuhua, Director of the General Business Department of the China Light Industry Council, and Jin Yanfang, Associate Research Fellow of the Technical Review Department of the National Institute of Standardization to teach the staff members about the operation procedures and related requirements of the standard system revision project and related requirements. /T1.1-2009 Standardization work guides on standard system revision work.

According to Wang Xuhua's introduction, the current standard development is divided into nine phases: pre-research phase, project phase, drafting phase, consultation phase, review phase, approval phase, publication phase, review phase, and revocation phase. Wang Xuhua said that he understands the relevant procedures for standard setting, and that the relevant units and individuals involved in the formulation of the standard will have the help of the outline and collar type, which will help standardize the standard setting.

Jin Yanfang started from the concept of standardization and standardization, and started with the standard structure and levels, the preparation of elements, and the presentation of elements, and explained the relevant specifications for standard compilation and revision.

The zipper club members who attended the training course agreed that the detailed explanations of the two teachers are just as timely as they are preparing for the development of the zipper standard. The last time the zipper's national and industrial standards were written was ten years ago, and some members did not participate in it at that time. Many people participated in the formulation of national standards for the first time. This training will definitely make them more smooth and orderly in the preparation of future standards.

Liu Runfeng said in an interview that promoting the industry standardization process is an important task for the hardware industry during the “12th Five-Year Plan” period. After summarizing the relevant experience of standardization work during the “11th Five-Year Plan” period, the leaders of the China National Hardware Products Association and the National Hardware Standardization Technical Committee believe that to promote industry standardization, we must first start with the training work, and participate in the revision of national standards and standards. The company’s business leaders and technical backbones started. Through the form of centralized training, the effect of using points is achieved, and the standardized knowledge, ideas, and national policies are extended to the entire industry to achieve the purpose of consolidating the foundation and comprehensively improving it.