The selection and determination of the regulating valve diameter is mainly based on the flow capacity of the valve, ie Cv. From the calculation of the Cv of the regulating valve to the determination of the diameter of the valve, the following steps are generally required:
1. Calculate the flow rate. The existing production capacity, equipment load and the condition of the medium determine the Qmax and Qmin of the calculated flow.
2. Determination of the differential pressure before and after the valve. S (resistance coefficient) is selected according to the selected valve flow characteristics and system characteristics, and then the calculated differential pressure is determined.
3. Calculate Cv. Select the appropriate calculation formula and chart according to the adjusted medium to find Cmax and Cmin
4. Use Cv. According to Cmax, select >Cmax and the closest Cv in the selected product standard series
5. Check the valve opening degree. Generally, the opening degree of the maximum calculation flow rate is ≯90%, and the opening degree when calculating the minimum flow rate is 10%.
6. Check the actual adjustable ratio of the regulating valve. General requirements for actual adjustable ratio ≮10
Concerned about surprises
Tags: Qmax flow characteristics Cv calculation flow opening
Previous: Three major product features of Tongcheng manhole cover plastic mold Next: Bathtub maintenance method Daquan
Stop Valves are closed by screwing a rubber gasket down onto a seat in the middle of the valve. Pros only use small versions that act as shutoff valves for fixtures such as sinks and toilets and outdoor sillcocks. Flow is inefficient because of the circuitous route the fluid (water, in most cases) has to follow. It's important to orient the valve in the right direction with the arrow (cast into the side of the valve) aligned with flow direction. That way, water flows against the bottom of the rubber gasket. If the valve is put in backward, the flow will force the gasket away from the top of the valve.
Stop Valves, Shower Stop Valve, Water Stop Valves, Brass Stop Valve
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsir-valve.com