Because online shopping also has its limitations, in order to facilitate the general distinction and identification in the description of goods, there are several small ways:
(1) Look at the sheet to see the minimum size of the sheet in the description of the product. If the sheet is 230*250, then the width of the fabric used is 90% wider than 230 sheets (compared to 250 width), which is also useful. The 250-wide width makes 230+250 sheets. The manufacturer does this to save costs. In addition, the seller is asked whether the size is the blanking size or the finished product size.
(2) Look at the size of the pillowcase GB pillowcase is 48*74 (inner diameter). In some product descriptions, the pillowcase size is 50*80, which is vague. In fact, 50*80 is the outer diameter and the inner diameter is only 40*70. Although this size will save costs, but the high-grade pillow can not be loaded.
(3) Look at most of the quilt cover size is marked as 200*230. Buyers must consult the seller before purchasing. Ask if the 200*230 is the finished product size or the size reached after shrinking (because the cotton fabric has more or more Or less shrinkage rate). In addition, ask if there is a fixed rope tied to the core in the seller's quilt. If there is no fixed rope, you must put your own quilt on the quilt to fix the rope to avoid being cored. In the process of use, run around and huddle together.
(4) Look at the width of the 250cm width of the fabric 99% of the fabric is a high-grade fabric, part of the 230cm width is also a high-end fabric (active combing), but the future 230cm wide width of the high-end fabric will no longer be produced! If the size of the bed sheet of the kit is 230*250cm (this is to save some cost), you should consult the seller if it is 250*250cm, is it a unique one, is there no seam, if you answer yes, you can buy it with confidence. Now!
(5) About the bed cover The general bed cover is more beautiful than the bed sheet. The reason is mainly on the skirt. The beauty of the skirt is mainly the density of the discount. The amount of the bed cover discount is calculated as follows: if a 1.5 m * 2.0 The bed cover of the meter, the total length of the skirt should be (1.5 +2.0 +2.0) * 2 = 11 meters. And the total length of the small cover of some small manufacturers is only 7 meters, Imagine how such a cover will be beautiful .
Reminder: Few sellers will lose money to do business (except for shooting), and some products with a price of around 100 yuan are known as active printing and dyeing four sets is impossible! (unless the seller wants to lose money to sell)! You are When you receive a four-piece set of 40 yarns that are active and dyed at a very low price, if you feel unsatisfied, please go to your local quality supervision bureau to check it. The yarn appraisal fee is about 20 yuan!
Overshot go into the heart of the drill pipe, the slider move up, make the tube socket head can be inserted into the center, when on the slider move up tight, using friction lift drill, remove loose again after the slider, by means of the connection string to slide along the block should tighten, set aside the center pipe, but in front of the salvage must first determine the bit in the bottom of the hole position, can be in a thin plate with bolts tight end of drill pipe, Drop the drill pipe to the bottom of the hole and press it on the drill bit. After waiting for a moment, it is proposed that the relative position of the drill bit at the bottom of the hole and the center of the rotary plate of the drill can be determined by observing the indentation left by the center pipe of the drill bit on the board, and then move the drill or rotary plate so that the center of the rotary plate is directly in front of the center pipe of the injured head, so as to ensure that the fishing device can be inserted into the center pipe accurately.
Overshot Assembly,Fishing Tools,Overshot Assembly For Sale,Overshot Fishing Assembly
wuxi shengmeirun trading co.,ltd. , https://www.smrxz.com