Nuclear accidents at the Fukushima Daiichi nuclear power plant in Japan have caused widespread concern. In this context, the development prospects of clean energy industries such as wind power are more promising. The European Wind Energy Association recently issued a communique in Brussels, Belgium, saying that the EU plans to invest 400 billion euros in the next 20 years to implement the wind power industry plan. Industry insiders pointed out that the current domestic wind power equipment is increasingly showing cost competitiveness in the world, and it is expected to benefit from the development of wind power in Europe in the next 20 years.
Europe has always been a leader in the wind power market. As of the end of 2009, its cumulative installed capacity was 7655.3MKW, accounting for 47.9% of the world's total wind power installed capacity, exceeding the target of wind power installed capacity reaching 4000 MKW in 2010. However, in terms of new installed capacity in 2009, Europe only accounted for 28.2%, North America reached 39.3%, Asia reached 30%, Europe began to lose its leading position for many years, and China and the United States became the locomotives to promote the global wind power industry.
It is in this situation that European wind energy practitioners continue to exert pressure on decision makers. It is reported that the European Wind Energy Association recently called on the EU to set a 2030 renewable energy target as soon as possible to ensure that the EU has a stable energy policy to facilitate long-term investment arrangements for the wind power industry. Earlier, the association has expressed satisfaction with the EU's 2020 renewable energy target, but is concerned about its subsequent policy gap.
Currently, the association supports the European Renewable Energy Council's 2030 renewable energy target, which means that more than 45% of EU energy consumption will come from renewable sources, of which wind power will account for 28.5% of electricity production.
In his letter to the European Wind Energy Association, Van Longpei, the permanent chairman of the European Council, also said that it is necessary to pay attention to the problems that arise after the 2020 energy policy expires. According to the current 2020 national plan formulated by EU member states, wind power generation will account for 14% of the EU's total power generation in the next 10 years.
Faced with this favorable situation, Chinese wind power companies are expected to take a slice of it. According to a statistics from Donghai Securities, the current cost of wind power installations in Europe is around 1,350 euros/kW, which is converted at an exchange rate of 8.8 yuan/euro. The cost of foreign wind power installations is around 11,800 yuan/kW, and the installed cost of wind power in China is currently at present. At around 4,000 yuan / kW, the cost competition advantage supports China's wind turbines a large number of exports.
"In fact, an incomplete statistics shows that China's wind turbine exports increased by 8.8 times in 2010, and orders in 2011 also increased by 6.3 times compared with 2010 exports, further confirming the optimistic export prospects of China's wind power equipment. The export of wind turbines will further accelerate, which will drive the rapid growth of China's wind power industry," said Niu Jigang, an analyst at Donghai Securities.
At present, there are 24 listed companies related to wind power equipment in China, among which wind power equipment suppliers include Goldwind Technology (22.03, -0.32, -1.43%), Sinovel Wind Power (76.20, 0.03, 0.04%), and the East. Electrical (28.43, -2.34, -7.00%), Shanghai Electric (7.95, -0.36, -4.33%), Tianshun Wind Energy (24.16, -0.37, -1.51%), etc. At present, Huarui Wind Power, Goldwind Technology and other enterprises have begun to develop wind turbines with a single power of 5MW. Huarui Wind Power is expected to launch China's first self-developed 6 MW wind turbines this year.
Other listed companies have main components, gearboxes, blades, converters, towers, generators, yaw systems, central monitoring systems, electronic control systems, hydraulic systems, wheels, cabins and other wind power equipment components. Certain advantages. With the rapid growth of wind power installed capacity, the above-mentioned wind power equipment parts manufacturers will also achieve breakthrough development in a relatively short period of time, and it is expected to benefit from the increase in European wind power investment.
Specifically, the localization concept of wind power equipment components such as main bearings, blades and converters is worthy of attention. Tianma shares (16.85, 0.03, 0.18%), Zhonghang Heavy Machinery and Sinoma Technology (45.50, -0.29, -0.63 %) is one of the representative companies.
Oil Paint Brushes,Sponge Paint Brush,Foam Paint Brush,Synthetic Paint Brush
Danyang Rixing Tool Co.,Ltd. , https://www.dyrxtool.com