Drainage of common vacuum cleaners and solutions

Nowadays vacuum cleaners have generally entered our lives. Whether it is home or factory, we are already familiar with the use of vacuum cleaners. In the process of using vacuum cleaners, are you more or less confronted with simple but difficult problems? ? In the hot summer days, due to the weather, the vacuum cleaner will inevitably be hot, and it is necessary to pay reasonable attention to maintenance. Today we are talking about the common problems in the use of vacuum cleaners.
Is the machine not suctioned during operation?
The elimination method determines that the vacuum cleaner is in an electromechanically separated state;
Check whether the dust bucket is filled with garbage or hair;
If there is a phenomenon that the dust bucket is full, clean the dust collection chamber;
Check the filter of the vacuum cleaner for clogging;
Maintenance steps thoroughly clean the filter and ensure the smoothness of the filter.
Remove the hose from the vacuum cleaner and check the patency of the hose;
If there is a clogged foreign body in the hose, it should be immediately cleared and the hose should be restored;
Place the vacuum cleaner in a cool, ventilated environment to allow it to cool naturally;
After a period of time, the vacuum cleaner is recommended to stop for a while. It is a normal phenomenon that the high-speed motor is overheated after long-term use.
After cleaning the household garbage with a vacuum cleaner, it is recommended to perform a "cleaning" of the vacuum cleaner to avoid clogging of the machine.

Angle Valves

Globe Valves and angle valves are designed for throttling or regulating flow in commercial and industrial applications. Bronze, cast iron, or cast ductile iron materials. Threaded, flanged, or solder end connections.

Angle valves for use in commercial and industrial applications. Typical services include hot and cold water, HVAC, steam, compressed air, gas and other general utility services.
Vacuum angle valve is used for turn on or shut off the airflow in the vacuum pipeline, the applicable media is air and non-corrosive gases.
It has two structures, one is angle type and another is a 3-way type within an ISO-KF or ISO-F various flange end pre-pump port.
a) Small diameter (≤DN50) valve body are precision investment casting.
b) Large diameter (> DN50) valve body are molding shaped seamless steel or steel plate.
c) Bellows sealed structure can withstand 150ºCtemperature, metal sealed structure can withstand 450ºCtemperature.
d) Can install on any position to control the airflow in the vacuum pipeline, as an on-off valve purpose

Angle Valves, Angle Globe Valves, Brass Angle Valve, Zinc Angle Valve

ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalves.com