Specific contents include plastering of interior and exterior walls and ceilings, interior and exterior wall finishes and veneers, facades on the floor, installation of floral ornaments on house facades, paintings for woodwork and metal products such as doors and windows, etc. It is a house. The last construction process of building construction!
The role of decorative engineering is:
The influence of human factors, such as collision, wear and the effects of water, fire, acid, and alkali, can also damage the building structure during use.
The impact of natural factors, such as cement products will become loose due to the role of the atmosphere, steel will be oxidized and rust, bamboo and wood will be eroded by microbial erosion.
2, to meet the requirements of the use of functional rooms, room decoration purposes are used to complete certain functions. The role of the decoration project is to properly adjust and utilize the existing building space according to the requirements of the function, so that the building space can provide better functional services. 3, to meet the people's aesthetic requirements In addition to the space has a certain function of the requirements, but also have some requirements for the beauty of space, this demand with the development of society and rapidly improve. This requires that after the completion of the decoration project, not only the use of functional requirements, but also the user's aesthetic requirements.
So the decoration project is the last step of the house and it is also a necessary step
Space Effect Picture Three Trees Lacquered House Paint Room Technology Glass Glass Door
Previous What is particle board?
Next What is plywood?
Introduction of paint materials, dressings and tools: According to chemical composition: Polyester paint, nitrolacquer, polyurethane paint are classified according to the finished product effect: varnish, paint (mixed oil), wipe paint (colored varnish), Open paint (exposed wood grain),,,,,,,,,,,,,,,,,, Dressing material: Transparent putty: Used for repairing varnish at the later stage, for potholes, and where the lines shrink. Make the paint more even. Color Semen: Used with colored varnish. Another: If the line and the panel color difference more...
1. The seams of gap wood sealing line, corner line, and waistline veneer are not more than 0.2mm, the angle between the line and the line mouth is not more than 0.3mm, and the interface between the veneer and the plate is not more than 0.2mm, the sliding surface error is not Beyond 0.3mm. 2, structural inspection structure ... 80 after the small husband and wife marriage, petty marriage, romantic mood, fashion show, a member of the exclusive cash discount, Mediterranean style blue + white, mosaic, even for home art...
1. The best time to move into a new home after renovations During the construction of a home, a large amount of decorative materials are used. Most of them are chemically synthesized materials, and volatile components are present. Therefore, the renovated room will have a certain chemical smell. Once you have finished your check-in, there is no benefit to the human body. You should leave your home for a few days until the odor is basically eliminated before you check in. Normally, it should be kept for at least three days. During the open period, air circulation should be ensured to avoid rain and sunlight. Such as...
Mosaic's small, variable body, compared to large tiles, can better adapt to the needs of different spaces, can create a variety of visual effects as they wish. For the room's curved surface or corners, it is possible to display the special features of the small figure and cover the bread with a smooth and complete cover. Second, the mosaic is an art of decoration that requires calming down to study. It has too many combination techniques, so you have to grasp the overall style of the space before choosing, and then design a heart-shaped pattern, will work with collage...
The conclusion of the project completion should not be taken care of
submit
China Aluminium Profile manufacturer supplies Anodized Aluminum Profile In Black, made of Aluminium Alloy 6061, 6063, 6060, with T4, T5, T6 Temper.
Anodizing was first used on an industrial scale in 1923 to protect Duralumin seaplane parts from corrosion. Anodized aluminium extrusion with powder coating is a popular architectural material.
Extruded profiles is extrusion of a shaped product that can be a variety of configurations but does not include sheet or film products. Extruded profiles can include solid forms as well as hollow forms. Products ranging from tubing to window frames to vehicle door seals are manufactured this way and considered profile extrusion.
To process hollow shapes a pin or mandrel is utilized inside the die to form the hollow sections. Multiple hollow sections require multiple pins.
Aluminum alloy 6000 series, from T3-T8.
Extrusion profile is used in various fields, such as rail transit, climbing products, electron communication, LED equipment, solar panel, and display equipment and so on.
Surface treatment: milling-polish-anodize (include color for silver, red, champagne, black, blue, bronze and so on)-brush-sandblasting-powder coated and so on.
Aluminium Profile
Aluminum Profile,Anodized Aluminum Profile,Anodized Aluminum Profile In Black,Aluminium Profiles
SUZHOU RIZHONGTIAN ALUMINUM CO.,LTD. , http://www.alumi-china.com