What is the installation height of household hardware? Many people have not seriously considered this problem. After the installation master came, they followed the feeling of installation. In fact, the height of the hardware should first be installed according to the average height of the main users. Secondly, if you feel that this is more troublesome, you can install it according to the experience level. Then again, the installation worker does not know the average of your family. Height, so it is generally installed according to the experience.
So, what is the height of this experience?
First, the towel rack
Generally, it should be installed outside the bathtub, about 1.8m from the ground. The upper layer should be placed with a bath towel, and the lower tube can be used to hang a towel.
Second, double towel rack
It can be installed on an empty wall in the center of the bathroom. When installed separately, it is about 1.5m away from the ground.
Third, single towel rack
It can be installed on an empty wall in the center of the bathroom, about 1.5m off the ground.
Four, single cup holder, double cup holder
It is usually placed on the wall on both sides of the washbasin and is lined with the cosmetic frame. It is often used to place toothbrushes and toothpaste.
Five, toilet brush
It is mounted on the wall on the back side of the toilet. The bottom of the cup is about 10cm away from the ground.
Six, soap net, soap ashtray
More on the wall on both sides of the washbasin, in line with the dressing table; can be combined with a single cup holder or a double cup holder; the soap net can also be placed on the inner wall of the bathroom for easy bathing; soap ashtray It is installed on the side close to the toilet to facilitate the soot.
Seven, single-layer rack (makeup rack)
Installed on the top of the washbasin, the lower part of the mirror, the height of the washbasin is 30cm.
Eight, two-tier rack (makeup rack)
Installed on both sides of the washbasin.
Nine, clothes hook
It can be installed on the wall outside the bathroom. It should be at a height of 1.7m from the ground. It can be used to hang clothes during bathing, or it can be combined with multiple hooks.
Ten, paper towel holder
It is installed on the side of the toilet, easy to reach by hand, and less obvious, generally 60cm off the ground.
Table Plasma Cutting Machine features:
1. Table Plasma Cutting Machine with welded lathe bed of thick profiled steel, more solid and stable.
2. Perfect lathe table design, 8mm steel plates fixed on lathe table covered by cast sheath.
3. Advanced material inclined discharging design.
4. Table plasma Cutting Machine support FASTCAM nesting software such as the standard G code path generated file can also be read by software conversion software such as AUTOCAD generated DXF formats. U disk exchange control system processing files, easy to operate.
5. Table plasma cutting machine support CAMDUCT software professional for air duct industry.
Table Plasma Cutting Machine
Plasma Cutter For Stainless Steel,Cnc Steel Cutting,Ss Cutting Machine,Ss Plate Cutting
Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnmetalcutting.com