Analysis and solution of the damage of injection molding products
| Rigid plastic parts such as PS form dense ripples on the surface near the gate, centered on the gate, sometimes called a shock pattern. The reason is that when the melt viscosity is too large and the mold is filled in a stagnant form, the front end material will quickly condense and shrink when it contacts the surface of the cavity, and the later melt expands the contracted cold material to continue the process. Constant alternating causes the stream to form a surface grain in the forward direction. Solution: (1) Increase the barrel temperature, especially the nozzle temperature, and increase the mold temperature. (2) Increase the injection pressure and speed to quickly fill the model cavity. (3) Improve the size of the runners and gates to prevent excessive resistance. (4) The mold exhaust should be good, and a large enough cold well should be set. (5) Do not design the parts too thin. |
Brinell hardness tester is a precision measuring instrument for measuring brinell hardness of metals .
Brinell hardness tester is mainly used for cast iron, steel, non-ferrous metals and the degree of hardness measurement of the soft material such as alloy, brinell hardness test is one of the largest dimple all Hardness Testing method, it can reflect the comprehensive performance of materials, from the sample organization microsegregation and composition is not uniform, so it is a kind of hardness test method with higher accuracy.
Brinell Hardness Tester,Portable Brinell Hardness Tester,Brinell Hardness Test Unit,Portable Hardness Tester Brinell
TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com