Analysis of cage data of TIMKEN tapered roller bearing

Source: China Bearing Network Time: 2014-03-13

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Because the cage of the tapered roller bearing usually does not accept the load; it only has the effect of separating the roller around the raceway; therefore, the cage of the TIMKEN bearing in the United States is limited by low carbon steel.
Pin cage (pillar cage)
The pin cage consists of two rings; one at each of the rollers. The struts of the cage pass through the middle hole of each roller; the one ring is locked; and the other ring is welded. Medium-sized and large-aperture TS bearings can have more rollers; thus, they can improve the bearing capacity.
For some polymers holder <br> depict this particular use of the bearing; As UNIPAC use are polymeric bearing holder Laid other special bearings; interspersed as roller bearings; Applied in particular between rollers from a polymeric sheet Instead of a one-of-a-kind cage.
Non-ferrous metal processing <br> cage thrust bearings TIMKEN the United States use some type of cage.
Specially reinforced cage <br> some particularly useful; For high power and high speed, heavy-duty shocks and axial oscillation shaking and / or high speed up and slow down other conditions; it is necessary to choose specially reinforced cage. These special "L-type" cages are made of thicker materials; they are also spaced apart from one another (and thus; compared to gauge bearing depictions; fewer roller applications). The cage is guided to the outer diameter of the small rib of the inner ring.

Recommend to friends comments close window

Bearing related knowledge

The key to the selection of the bearing is to analyze the common method of the car bearing.
SKF bearing temperature detection of bearing steel metallurgical skills

This article links to http://
Please indicate the bearing network http://

Previous:The ultimate axial bearing capacity of KOYO bearings can be edited: Bearing operation and fault treatment (1)

Steel poles are commonly used to carry several types of electric power lines, distribution lines and lighting system. Distribution lines carry power from local substations to customers. They generally carry voltages from 4.6 to 33kV for distances up to 30 miles, and include transformers to step the voltage down from the primary voltage to the lower secondary voltage used by the customer. A service drop carries this lower voltage to the customer's premises.

Telecommunication Mast

Telecommunication Mast, Telecommunication Antenna Mast,Telescopic Telecommunication Mast,Signal Telecommunication Mast

Yixing Steel Pole International Trading Co., Ltd , https://www.yx-steelpole.com