Aluminum ceiling is more common in public places, in the home space kitchen and more use of aluminum alloy ceiling, aluminum ceilings in various forms, the effect can also meet the needs of different groups of people, there are high-end products also have cheap products, and then the aluminum alloy ceiling installed The process will also encounter some situations, such as aluminum alloy ceiling uneven, how to deal with this situation, let us take a look at it.
The ceiling of the kitchen and bathroom is made of aluminum alloy ceiling. However, after the renovation, it was found that the ceiling of the kitchen and bathroom is not flat. Why is there such a situation?
Causes of unevenness in the ceiling of aluminum alloy panels include:
1, the horizontal line control is not good. This is due to poor control when the line is released, or the keel is not leveled and the control of the device is poor.
2. The method of installing the aluminum alloy plate is not proper. It is also the reason that the integrated ceiling is uneven. In severe cases, the wave shape will occur. If the keel is not leveled and then the slats are installed, then leveling will cause the slats to be unevenly loaded and wavy.
Lightweight slat suspended ceilings can be locally deformed due to unacceptable gravity. This phenomenon occurs mostly in the ceiling form of keel and fixtures. In addition, if the boom is not secure, it can cause local subsidence. The slats themselves are deformed and installed without correction, and uneven ceilings may also occur. This phenomenon occurs mostly on long strip types.
To solve the uneven ceiling of aluminum alloys, attention should be paid to the following issues:
1. For the elevation line around the integrated ceiling, the wall should be accurately projected to the wall. The error cannot be more than ±5mm. If the span is large, additional control points should be added at appropriate positions in the middle. A section of the cable into the control, the line should be straightened, can not sink.
2. The slats can be installed after the keel has been leveled and adjusted. This is a reasonable and important procedure in construction. On the contrary, the flatness is difficult to control. Especially when the plate is thin, the rigidity is poor, and uneven external force, even if it is a small force, is easily deformed. Once the deformation is more difficult to adjust on the ceiling surface, you can only remove the adjustment.
3, should be considered with the equipment. Equipment that cannot be directly suspended shall be provided with a separate boom and fixed directly to the structural roof.
Summary: After reading so much information about aluminum alloy ceilings, do you think they have learned a lot? If you still want to read more articles about aluminum ceilings, you may want to pay attention to this website information channel. More valuable articles are waiting. you.
4, if the use of expansion bolts fixed boom, should do a hidden record, such as the expansion bolt buried depth, spacing and so on. The pull-out test of the expansion bolt is also needed in the key parts.
Ceiling Integrated ceiling Ceiling design Kitchen Integrated ceiling Kitchen ceiling Ceiling
Sliding Bar Set,Wall Mounted Sliding Bar Set,Sliding Bar With Shower Bracket,Adjustable Sliding Rail Set
Kaiping Rainparty Sanitary Ware Technology Co.,Ltd. , https://www.rpshower.com