Aluminum Alloy Door and Window Material Precautions Matters needing special attention in the installation and construction of aluminum alloy door and window materials in coastal areas Due to the relatively large amounts of saline and alkali contained in the coastal areas, there are some areas that have not been desalinated using national standards. In the case of sea sand, the corrosion of aluminum alloy doors and windows is rather serious and should be given special attention. In addition to the above procedures, the following procedures should also be strictly followed:
1. The aluminum doors and windows brought into the construction site should be placed in a well-ventilated, dry and clean warehouse.
2. The height of the sleeper surface of the place to be placed above the ground should be ≥100mm, each pile should not exceed 15 樘 (fan), and a soft material levelling should be applied between each 樘 (fan) to prevent crushing and between aluminum alloy and hardware. Frictional damage to the protective film on the surface of the profile.
3, door and window openings must have a drip line, should be tested before installation. Because the rainwater flowing through the wall made of sea sand is highly corrosive, it must be guarded against.
4, the installation of iron sheet should adopt the card type, to minimize the destruction of the protective layer of aluminum alloy processing.
Company Name: Ninghai Longxiang Aluminum Co., Ltd. Aluminum alloy door and window material company Address: No.2, Zhongshan East Road, Shuangshan Village, Ningbo, Ningbo, Zhejiang, China (315600)
Tel:-
Contact person: Mr. Yuan Enterprise Website: http://longxiang.alu.cn
24V Bulb Sign,Light Bulb Sign,Exit Light Bulbs,Electric Bulb Sign
Guangdong Yuansheng Ad.&Lightings Co,Ltd. , https://www.pilottsignonline.com