Heating is stopped. Will the water in the pipe not corrode the pipe? Many users are accustomed to putting water immediately after the heating is stopped so as to prevent the radiator from rusting for a long time. This is a common misunderstanding. In fact, the water in the system is treated with anti-corrosion treatment, which can well isolate the corrosion of the air to the radiators and pipes, and extend the service life of the entire system. If you are not satisfied with water conservation, the service life of the radiator will not be long enough to use water for maintenance. In the heating facility with pressure-temperature maintenance, the pipe network is filled with demineralized water containing chemicals such as antisepsis and scale inhibitors. Users should not arbitrarily discharge the water in the heating device. Otherwise, the effect of wet maintenance will not be achieved. It will also affect The service life of the heating equipment and the heating quality during the heating period.
During the non-heating period, users need to repair or leak the water in the home heating facility. Please call the heating company in time. The staff will promptly close the valve for you and wait until the heating facility is isolated before performing the maintenance operation.
Cut-Off Wheels is a simplified product of thousands of impeller, mainly used in industrial production of polishing, is also a kind of industrial consumables products. The impeller matrix has mesh cloth, nylon, plastic, steel paper, etc., the number of pages varies, and is evenly distributed in fan shape. Particle size 36#-400#, 60#, 80# is the most common, the outer diameter of 4"-7" installed in the angular grinder, used for welding seam, positive edge burr grinding and grinding processing, can be interchangeable with the cymbal grinding wheel, has the advantages of good elasticity, high efficiency, good heat loss, low noise can replace the resin cymbal grinding wheel, it has strong elasticity, high tensile and bending strength, Good self-sharpening, high grinding rate, low noise, suitable for grinding the welding seam in the box and the flash edge of the stamping parts. It is mainly used for grinding and polishing of various stainless steel and carbon steel structural parts.
Cut-Off Wheels,Grinding Wheel,Disc For Angle Grinde,Flap Wheel
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com